x-sense XS01-W User Manual

X-SENSE
Wireless Photoelectric Smoke Alarm
XS01-W
User Manual
This user manual contains important information regarding the operation of your X-SENSE smoke
alarm. Ensure you read this user manual fully before installing and operating the alarm. If you are
installing this smoke alarm for use by others, you must leave this manual (or a copy of it) with the end
user.
Package Contents
1 × Alarm Unit
1 × Mounting Bracket
2 × Screws
2 × Anchor Plugs
1 × User Manual
1 × Warranty Card
Safety Information
IMPORTANT!
Dangers, warnings, and cautions alert you to important operating instructions or to potentially
1.
hazardous situations. Pay special attention to these situations.
This alarm is not intended to alert hearing impaired individuals. The use of alcohol or drugs may
2.
also impair one's ability to hear the smoke alarm.
Fires in chimneys, walls, roofs, different levels or behind closed doors might not be detected.
3.
This device does NOT detect flames, heat, carbon monoxide or other hazardous gases.
4.
WARNING!
Never ignore any alarm. Failure to respond can result in serious injury or death.
1.
The silence feature is only for your convenience and will not correct a problem. Always check
2.
your home for a potential problem after any alarm. Failure to do so can result in injury or death.
Test this smoke alarm once a week. If the alarm ever fails to test correctly, replace it immediately!
3.
If the alarm cannot work properly, it will not alert you to a problem.
Set up and Interconnect Smoke Alarms
All the XS01-W contains an inbuilt RF module, and enables you to wirelessly connect two or more