Correcting A Mistake - Canon SmartBase PC1270D Fax Manual

SB_PC1270D_FG_EN.book Page 2 Monday, February 18, 2002 12:20 PM
• The Function key will light up by pressing Function to be able to operate Space, Delete or Clear.
Entering Letters
1
Press to switch to uppercase letter mode (:A) or lowercase letter mode
(:a).
2
Press the numeric key that contains the letter you want.
• Press repeatedly until the letter you want appears. Each key cycles through the
letters it contains.
• If you are unsure which key to press for the letter you want,
3
Continue entering other letters using the numeric keys.
• If the next letter you want to enter is under a different numeric key, simply press
that key until the letter you want appears.
-or-
If the next letter you want to enter is under the same numeric key you pressed in
(+) to move the cursor to the right. Then press that same numeric
step 2, use
key repeatedly until the letter you want appears.
• Press Space to enter a space and move the cursor to the right.
Entering Symbols
1
Press to switch to letter mode (:A) or (:a).
2
Press repeatedly until the symbol you want appears.
3
If you want to enter another symbol, use
right, then press repeatedly until the symbol you want appears.
Entering Numbers
1
Press to switch to number mode (:1).
2
Press the numeric key that contains the number you want.
• Press Space to enter a space and move the cursor to the next digit.
3
Continue entering other numbers using the numeric keys.

Correcting a Mistake

If you make a mistake while entering letters or numbers, you can delete it by pressing Delete or Clear.
To Delete the Last Letter/Number
Press Delete once to delete the last letter or the last number you entered.
To Delete All Letters/Numbers
Press Clear to delete all letters or all numbers you entered.
2-2
p. 2-1.
(+) to move the cursor to the
Ex:
C
Ex:
CA
Ex:
_
Ex:
Ex:
-
Ex:
_
Ex:
1_
Ex:
10_
Ex:
:A
:A
:A
:A
:A
:A
:1
:1
:1