21. PRESS the
button to save the new time.
22. PRESS the
button until "GAP SETTING" is displayed.
23. PRESS the
button. The display will begin to flash.
24. Using the
25. PRESS the
button to save the new gap.
26. PRESS the
When selecting "RECOVERY" if above 285 degF "TOO HOT" will be displayed. When
the temperature is correct "RECOVERY" will remain displayed. You are now ready to
follow the RECOVERY PROCEDURE.
or
button, change the display to 090.
button 2X to exit and return to normal operating mode.
https://clamshell.garland-group.com
Page 3 of 3