Specific Command Summary
Command
:VERSion?
:SYSTem:COMMunicate:GPIB
[:SELF]:ADDress/?
:TRIGger
:CONFiguration/?
:TRIGger:CONFiguration
:EXTended/?
:FPEDal/?
:TRIGger[n][CHANnel[m]]
:INPut/?
:OUTPut/?
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
Table 4
Specific Command Summary (continued)
Description
Returns the instrument's SCPI version.
Sets or returns the GPIB address.
Generates a hardware trigger.
Sets or returns trigger configuration.
Sets or returns extended trigger configuration.
Enables/disables the Input Trigger connector to be
triggered using a Foot Pedal or returns whether the
Input Trigger connector can be triggered using a
Foot Pedal.
Sets or returns the incoming trigger response .
Sets or returns the outgoing trigger response.
Specific Commands
Page
61
62
109,
115
113
115
115
110
112
41