Removed Command; Obsolete Commands - HP 8163A Series Programming Manual

GPIB Command Compatibility List
Command
*SRE/?
*TRG
ABORt
STATus:OPERation:
NTRansition/?
STATus:OPERation:
PTRansition/?
STATus:QUEStionable:
NTRansition/?
STATus:QUEStionable:
PTRansition/?
SYSTem:BEEPer:STATe/?
*SAV
*RCL
BDATA?
DOSMODE/?
TRACe:CATalog?
TRACE:DATA?
TRACE:POINts?
WAVEACT
misc 200
166

Removed Command

Table 10 contains details of commands that have been removed without
replacement.
Change
No support for this command/query.
No support for triggered commands.
This command is not supported; in every case, the bus is
blocked during command execution.
These status model features are not supported.
Beeper access is not supplied.
User interface or GPIB settings cannot be stored or re-
called.
Memory card access is not provided.
The TRACe tree is not supported; the CC_UNCAL
curve does not exist.
Alignment to external wavemeter is not supported.
Risetime control is not supported yet.
Table 10 Removed Commands

Obsolete Commands

Table 10 contains details of commands that have been directly replaced.
HP 8163A Lightwave Multimeter, HP 8164A Lightwave Measurement System,
& HP 8166A Lightwave Multichannel System User's Guide, E1299
Removed Command
Affects
Both
8153
8153
8153
8153
8167/8
8167/8
8167/8
8167/8
8167/8