Table of Contents
Advertisement
Command Syntax: *RCL <value>
Where:
Example:
Usage:
Command Syntax: *RST
Example:
Usage:
Command Syntax: *SAV <value>
Where:
Example:
<value> ::= 0 to 9 (integer–NR1 format)
OUTPUT 711;"*RCL 3"
*RST (Reset)
The *RST command returns the switch to its power-up condition. For all lay-
ers, each port is set to its OFF position or channel 1.
HP-IB and RS-232
OUTPUT 711;"*RST"
*SAV (Save)
The *SAV command saves the current state of the instrument to the specified
instrument state register.
HP-IB and RS-232
<value> ::= 0 to 9 (integer–NR1 format)
OUTPUT 711;"*SAV 3"
Programming
Common Commands
4-17
Advertisement
Table of Contents
