Table of Contents
Advertisement
W A R N I N G
Reducing ESD
Damage
• Personnel should be grounded with a resistor-isolated wrist strap before re-
• Be sure all instruments are properly earth-grounded to prevent a buildup of
Servicing
Electrostatic Discharge Information
To ensure user safety, the static-safe accessories must provide at least 1 MΩ of
isolation from ground. Refer to
static-safe accessories.
These techniques for a static-safe work station should not be used
when working on circuitry with a voltage potential greater than
500 volts.
The following suggestions may help reduce ESD damage that occurs during
testing and servicing operations.
moving any assembly from the unit.
static charge.
Table 3. Static-Safe Accessories
HP Part Number
Description
9300-0797
Set includes: 3M static control mat 0.6 m
(15 ft) ground wire. (The wrist-strap and wrist-strap cord are not included.
They must be ordered separately.)
9300-0980
Wrist-strap cord 1.5 m (5 ft)
9300-1383
Wrist-strap, color black, stainless steel, without cord, has four adjustable
links and a 7 mm post-type connection.
9300-1169
ESD heel-strap (reusable 6 to 12 months).
5-8
Table 3 on page 5-8
for information on ordering
×
×
1.2 m (2 ft
4 ft) and 4.6 cm
Advertisement
Table of Contents
