Specifications And Regulatory Information - HP 86060C Series User Manual

Specifications
Characteristics
Nominal values
Calibration cycle
C A U T I O N

Specifications and Regulatory Information

This section lists specifications and regulatory information of the HP 86060C-
series lightwave switches. Specifications apply over the temperature range
+0°C to +55°C (unless otherwise noted). All specifications apply after the
instrument's temperature has been stabilized after 120 minutes of continuous
operation.
Table 1-4 on page 1-8
The distinction between these terms is described as follows:
Specifications describe warranted performance.
Characteristics provide useful information by giving functional, but nonwar-
ranted, performance parameters. Characteristics are printed in italics.
Nominal value indicates the expected, but not warranted, value of the param-
eter.
HP warrants instrument specifications over the recommended calibration
interval. To maintain specifications, periodic recalibrations are necessary. We
recommend that the HP 86060C-series switches be calibrated at an HP service
facility every 24 months.
Improper connector care, cleaning, or use of mismatched cable connectors can
invalidate the published specifications and damage connectors. Clean all cables
before applying to any connector. Repair of damaged connectors due to
improper use is not covered under warranty. Refer to
Connectors" on page 1-13

Specifications and Regulatory Information

lists specification, characteristics, and nominal values.
for proper cleaning procedures.
General Information
"Care of Fiber-Optic
1-7