Advertisement
Quick Links
4
place
braces on
,
a flat
level surface
in approximately
their final location
The Basics:
• Always start with a flat, level surface.
• Use any 2" lumber in a variety of combinations:.
Using boards up to 12ft in length:
STACK THREE 2"X 4" BOARDS
2x4
2x4
2x4
STACK TWO 2"X 6" BOARDS
2x6
2x6
STACK ONE 2"X 6" BOARD AND ONE 2"X 8" BOARD
2x6
2x8
OPTIONAL
FOR LONG TERM GARDEN BEDS
or for added strength
For a more permanent
installation, use two 3"
deck screws per corner.
Screws not included.
slide board down
,
into brace
flush
with the corner
of the bace
slide second board
,
down into brace
flush with the first
board and the side
of the brace
repeat with
additional stacks
of boards
Advertisement
Summary of Contents for Gardener's Insta brace 8599321
- Page 1 place braces on slide board down slide second board repeat with a flat level surface into brace flush down into brace additional stacks in approximately with the corner flush with the first of boards their final location of the bace board and the side of the brace The Basics:...
- Page 2 Recommendations Wood • No pressure-treated lumber for edible plants. • Cedar or Redwood for most durability. • Douglas Fir or Pine work well too! Consider using 2” recycled/repurposed wood. It has a rustic feel, and it helps the planet. Size •...