Measuring Diode; Battery Replacement - SATA 05221 Manual

05221 Users Manual

Measuring Diode

●
Insert the plug of the black test lead to the "COM" jack, the
" " jack( the polarity of the red test lead is "+").
●
Set the rotary switch to the "
●
Connect red test lead to the anode of the diode, black test lead to the cathode of the diode.
Read the approximate forward voltage on LCD
( Note: Reading's unit is "mV" ).

BATTERY REPLACEMENT

When the symbol "
replaced.
" position.
" or " " is shown on LCD, it means the batteries are low and should be
plug of the red test lead to the
-18-