●
Use with caution when working above 30V ac rms, 42V peak, or 60V dc. Such voltages pose a
shock hazard.
●
When using the probes, keep your fingers behind the finger guards on the probes.
●
Connect the common test lead before you connect the live test lead. When you disconnect test
leads, disconnect the live test lead first.
●
Remove the test leads from the meter before you open the battery door or measure AC current.
●
Do not operate the meter with the battery door or portions of the case removed or loosened.
●
To avoid false readings, which could lead to possible electric shock or personal injury, replace the
batteries as soon as the low battery indicator ( "
●
Before using the clamp jaws to clamp the conductor to be measured, make sure that all the test
leads have been removed from the clamp meter.
●
Remove test leads from the meter and remove the clamp jaw from the clamped conductor
before opening the meter case or the battery door.
" or "
") appears.
-3-
05221 Users Manual