National Public Seating TAD Assembly Instructions

DOLLY COMPONENTS
E. Right vertical
post
B. Right table
support
A. Front frame
2x Non-Locking Caster
DOLLY FRAME ASSEMBLY
Attach both front(A) and back(D) frames with the table support
1
frames(B, C) using two large bolts in each side and tighten with
lock nuts.
Side of table support frame
with larger gap goes at the back
Be sure that all bolts are fully tightened.
Dear Customer, Thank you for your purchase. Although extreme care goes into manufacturing & packaging of
this product, mistakes are possible. If you encounter any missing parts or di culty in assembly, please contact
our customer service Toll Free at 1-800-261-4112 or info@nationalpublicseating.com for courteous & immediate
resolution to your problem.
Page 1 of 2
ASSEMBLY INSTRUCTIONS
TABLE ASSIST DOLLY
MODEL #TAD
G. Handle
H. Strap w/hook
www.nationalpublicseating.com
F. Left vertical
post
D. Back frame
2x Locking
Caster
C. Left table
support
INCLUDED HARDWARE
12x Large 12x Lock
Bolts nuts
2x Washers
2x Small
Bolts
TOOLS FOR ASSEMBLY
17mm or 11/16"
and 10mm or
13/32" Wrench
1-800-261-4112