National
@
Public
Seating ey.
Part#
(B)
(A)
Sketch
�
�
�
Description
Glides
Casters
Quantity
5
5
Base/Column assembly
1.
Insert Glides (A) or Casters (B) into each of the five legs of base (C).
2.
Insert column (D) firmly into center of base.
3.
Slide footring (F) onto column with ring facing upwards and place at
desired location.
4.
Slide column cover (E) over column.
5.
Tighten footring knob well to assure that it stays in place.
There is a rubber sleeve in the center of footring. To prevent
scratching of column when tightening knob, be sure that the sleeve
is in place and when tightening be careful to tighten over the rubber
sleeve.
Backrest assembly
1. Place backrest bracket (k) onto top of plate.
2.
Hold backrest (J) over bracket and align holes on bracket to holes on backrest.
3.
Using the provided Allen key , tightly secure the two backrest bolts (G) to backrest.
13807920 Kangaroo Stool Assembly Instructions
(C)
(E)
(D)
�
-
---
Base
Column
Column
Footring+height
adjusting knob
Cover
1
1
1
Note:
(F)
(G)
(H)
1
,
·'
-
Seat&
Seat mounting plate
Backrest Bolts
with backrest arm
1
1
6
Seat assembly
1.
Align seat mounting plate/backrest arm (H)with screw holes in underside of seat (I).
Loosely insert all four seat bolts (G) through holes on seat mounting plate/backrest
arm(H) into screw holes on underside of seat (I) and tighten only slightly, using the
provided Allen key.
After all four seat bolts (G) are properly inserted, tightly secure them in a crossed
fashion.
2.
Once seat mounting plate has been attached to seat, place seat over upper portion
of column and push down firmly.
(J)
(I)
®
� '
!)
Seat
Backrest
1
1
Find Kangaroo Task Stools @demco.com,
search kangaroo task stool
Call 800.962.4463 or email custserv@demco.com
Page 1
(K)
Backrest
bracket
1