Advertisement
Quick Links
EXO WALL BASIN SET 4*
�rJ
48
LO
c.o
'&
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Colour availability
Chrome, Matt Black, Gunmetal, Brushed Nickel
Pressure rating
Maximum continuous operating pressure 1 OOOkPa.
For best performance and longer life we recommend
150-500kPa
Hot and cold water inlet pressure should be equal.
Temperature rating
Maximum continuous working temperature 80
Suitable Hot Water
Storage tank: Yes
Units
Continuous Flow: Yes
Gravity Feed: Not suitable
Material
Typically Electroplated Brass
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product
warranty - refer to Warranty Conditions.
---
WaterMark
AS/NZS3718
WMKA01455
LO
c.o
'&
Disclaimer: Products In this specification manual mU&t by regulatlon be Installed by llceneed and registered trade people.
The meim.rfadurer/diibibutor lllServe the right to vsry 11p1 ; 11::ilii::atiom, or delete modelll from their range without prior
notification. Dimensions are nominal measuremenl5 only. Dimensions end set-outs llsmd are correct at time ofpubllcatlon
however the manufacturerfdlstr1butor takes no 191pOrwlblllty for pr1nUng ernn.
T11ChhgllVarslon-lNS3441RllYOO
200mm
°
(
To see the complete MILLI range go to
www.reece.com.au/bathrooms
page 1 of3
reece
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reece Milli EXO WALL BASIN SET 4
Summary of Contents for Reece Milli EXO WALL BASIN SET 4
- Page 1 Gravity Feed: Not suitable Material Typically Electroplated Brass To see the complete MILLI range go to www.reece.com.au/bathrooms CLEANING RECOMMENDATIONS We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions.
- Page 2 EXO WALL BASIN SET 4* 40 to 52mm FACTORY POSITIONED SEAL SET OUT DISTANCE Minimum 10mm Maximum 22mm Important: Do not move/remove the factory set seal prior to installation. Place each Ceramic cartridge with the factory set seal into the appropriate breech body. Using the supplied tool, screw the cartridge in until the seat is reached and nip it up until firm.
- Page 3 EXO WALL BASIN SET 4* HANDLE FITTING 1. Separate parts from the handle as shown in the illustration to the right. 2. Turn the ceramic cartridge to the off position. 3. Screw the Flange with O-ring onto the cartridge lock nut until flush against the finished wall.
Need help?
Do you have a question about the Milli EXO WALL BASIN SET 4 and is the answer not in the manual?
Questions and answers