Exit Without Saving; Ncr Scsi Bios And Drivers; Bios Flash Utility - AOpen AX5TC User Manual

Hide thumbs Also See for AX5TC:

Table of Contents

3.13 Exit without Saving

Use this function to exit Setup without saving the CMOS value changes. Do

not use this option if you want to save the new configuration.

The NCR 53C810 SCSI BIOS resides in the same flash memory chip as the

system BIOS. The onboard NCR SCSI BIOS is used to support NCR 53C810

SCSI control card without BIOS code.

The NCR SCSI BIOS directly supports DOS, Windows 3.1 and OS/2. For

better system performance, you may use the drivers that come with the NCR

SCSI card or with your operating system. For details, refer to the installation

manual of your NCR 53C810 SCSI card.

The BIOS Flash utility allows you to upgrade the system BIOS. To get the

AOpen Flash utility and the upgrade BIOS file, contact your local distributor or

visit our homepage at http://www.aopen.com.tw . Please make sure that you

have the correct BIOS ready, the BIOS filename is normally like

AP5TR110.BIN, which means model AP5T BIOS revision 1.10.

There are two useful programs, Checksum utility CHECKSUM.EXE and

AOpen Flash utility AOFLASH.EXE. Follow the procedures below to upgrade

your BIOS.

[CHECKSUM.EXE]

This utility will help you to determine if the BIOS has been downloaded

correctly or not.

1. Execute

C:> CHECKSUM Biosfile.bin

Biosfile.bin is the filename of the BIOS code.

2. The utility will show "Checksum is ssss".

3. Compare the "ssss" with original checksum posted on Web or BBS. If they

are different, please do not proceed any further and try to download the

BIOS again.

AWARD BIOS

3-35

Table of Contents