Download Print this page
Westomatic Primo Compact Install & Use

Westomatic Primo Compact Install & Use

Water reservoir
Hide thumbs Also See for Primo Compact:

Advertisement

Quick Links

WATER RESERVOIR
I N S T A L L & U S E

Advertisement

loading

Summary of Contents for Westomatic Primo Compact

  • Page 1 WATER RESERVOIR I N S T A L L & U S E...
  • Page 2 INSTALL WATER RESERVOIR The water reservoir allows the machine to be used without mains water connection: External Dimensions Water Reservoir: W230xD420xH455mm External Dimensions Total: W530xD515xH600mm Capacity Water Reservoir: 8.2litres/5.2litres with the Filter...
  • Page 3 OPTIONAL: Ingredient Box PN: 1057339 NB: The machine will have been set up to your specifications and tested at Westomatic HQ prior to install. All parts have been assembled on the machine. The QR code inside the machine gives access to the We:Support pages with technical information.
  • Page 4 Remove the protective cover plate for plastic is the power cable removed from feed through the top Locate the Switch off and power pins - UNPLUG the remove the red Primo Compact and purple wire from the mains connectors power...
  • Page 5 Connect the Replace the internal power back cover - cord to the plugs and fasten the Red-Red/Purple- two screws Purple Place plugs back Remove the red on power pins cover from the water entry on the Primo Guide the internal Attach water power cable to connector and...
  • Page 6 Insert the water Connect the hose in the Primo to the connector power outlet and Switch on Insert water hose Water into the water Reservoir is connector and now installed then attach to the water reservoir Connect the Primo and the water reservoir with the external power cable...
  • Page 7 USING THE RESERVOIR: These instructions show how to commission the reservoir to use : Ensure the Water Reservoir is clean before every refill The reservoir is dishwasher safe to max 50°C NB. The Brita filter lid should be cleaned by hand (if using)
  • Page 8 Fit filter into the Place the water Brita Filter lid tank into the (If using) unit and push to the back There is space Fill container under the tank with water: for spare water 8.2litres Total filters (5.2liters with filter) On the main Close the lid screen select...
  • Page 9 Select OPERATOR Enter Pin-Code MENU again to enter Service Menu Enter Operator Select SETTINGS Pin-Code (2.04) Default = 11111 Select EXTERNAL WATER TANK (2.04.19) Choose Switch to SERVICE MENU ACTIVE, (1.07) Select WATER RESERVOIR, Press SAVE...
  • Page 10 Water Reservoir is now set up and ready to use. It is possible to use both the Water Reservoir and the Fresh Milk Fridge at the same time for the full experience.
  • Page 11 CONTACT + 4 4 ( 0 ) 1 6 2 6 3 2 3 1 0 0 W e s t o m a t i c V e n d i n g S e r v i c e s L t d , s a l e s @ w e s t o m a t i c .