Westomatic Primo Touch Step-By-Step

12 month Check up!

Step by Step:
1. Check incoming mains water pressure (min. 2-Bar requirement)
2. If required, de-scale Boiler
3. Clean extraction System
4. Check Whipper motor for correct operation
5. Fit new Hygiene kit
6. Check operation of Ingredient Motors
7. Remove and clean Brewer - fit High Pressure Brewer Service Kit
8. Perform Brewer Cleaning Cycle using cleaning tablet
9. Remove upper Grinder Disc, clean both discs
10. Remove and clean Grinder Outlet Chute - check flap operating
11. Check coffee grind and dispensed weight are both correct
12. Check Grind Consistency
13. Test vend all selections - check for leaks and for drink quality
14. Pay vends with door closed (where applicable)

Safety Checks:

PAT test machine - Insulation &
Earth Bond only
Check Mains Lead - for damage/do
not connect to extension lead
Check Fuses -correct value and type
Check Looms - connections are free
from damage and fully secured

Tools / Parts Required

PAT Tester
Water Pressure Gauge
Cross Head Screwdriver
Grinder Adjuster Spanner
Door Service Pin
Gram Scales
Brewer Service Kit / Tablets

Hygiene Kit

Estimated Labour Time - 0.75hrs