STERWINS 40ECS1-2000.1 Assemby - Use - Maintenance Manual page 16

RU
KZ
EN
1. To become proficient, attend a recognised chainsaw training course to learn how to operate chainsaws
safely and effectively. Familialise yourself with all the controls and switches. Practice all movements with
the product switched off .
2. Always hold the product firmly with both hands; front handle with the left hand and rear handle with
the right hand. Fully grip both handles at all times during operation. Never operate the product using
only one hand.
3. Only use the product with a secure stance. Hold the product at the right-hand side of your body.
NOTE : Any other cutting positions should not be used with this product except the chainsaw.
Pay particular attention using the machine for the first time : focus and dedicate all your attention to this
first use. Make the first trial on a free space with no obstacle and no surrounding element
4.5 OPERATION
Switching on/off : illustration 4.1
To turn the tool ON, push and hold the safety lock-off button with your thumb, while squeezing the
ON/OFF trigger switch. Once the trigger switch engages, you can release the safety lock-off button and
proceed with operation. The safety lock-off button reduces the risk of accidental starting. To turn the tool
OFF, release the ON/OFF trigger switch.
Operation safety warnings :
• Check the product as well as accessories for damage before each use. Do not use the
product if it is damaged or shows wear.
• Double check that the accessories and attachments are properly fixed.
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
it down.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
• Before switching the product on, check whether it has been assembled correctly and all
the moving parts are running smoothly.
• We recommend slightly dampening surfaces in dusty conditions or using a mister
attachment.
We strongly recommend that before use of this product, you
attend a chainsaw training course to familiarise yourself
with the maintenance and usage of these products!
Thoroughly read this manual and adhere to all safety
instructions at all times. The manufacturer will not be
held liable for any accidents/injuries caused due to misuse
or incorrect maintenance of t is product!
16