Table of Contents
Advertisement
Sending a document using voice dialing _____
To use this feature you must first register the voice tags for voice dialing (see p. 2-14).
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see p. 4-1).
2
Press [Voice Dial]. Then speak the voice tag into the microphone.
The registered name will be displayed on the LCD.
CANON
3
With the party's name you wish to dial displayed, press [Start/Copy] to start the document
transmission.
• If the AUTO VOICE DIAL setting is set to ON, the fax automatically starts the transmission
(see p. 7-2).
• If the displayed party's name is not what you are searching for, press [Stop] to cancel the
procedure, and re-start from step 2.
n
If an error occurs every time you speak into the microphone, re-register the voice tag and try again
(see pp. 2-11 to 2-14).
4
4-7
Advertisement
Table of Contents
