Sony XR-L240 Service Manual page 16

XR-L240
FM Stereo Separation Adjustment
Setting:
[TUNER]
button: FM
FM RF signal
generator antenna jack (ANT100)
0.01 µ F
set
speaker out terminal
Carrier frequency : 98.00 MHz
Output level : 70 dB (3.2 mV)
Mode : stereo
Modulation : main: 1 kHz, 20 kHz deviation (26.7%)
sub: 1 kHz, 20 kHz deviation (26.7%)
: 19 kHz pilot: 7.5 kHz deviation (10%)
Procedure:
FM Stereo
Level meter
signal generator
connection
output channel
L-CH L-CH
R-CH L-CH
R-CH R-CH
L-CH R-CH
L-CH Stereo separation: A-B
R-CH Stereo separation: C-D
The separations of both channels should be equal.
Specified Value: Separation more than 30 dB
Adjustment Location: See page 17.
16
All manuals and user guides at all-guides.com
MW Auto Seek/Stop Level Adjustmant
Make this adjustment after "FM Auto Seek/Stop Level Adjust-
ment".
Setting:
level meter [TUNER]
10 k Ω
+
–
AM RF signal
Carrier frequency : 999 kHz
30% amplitude
modulation by
Level meter
1 kHz signal
reading (dB)
Output level
A
Procedure:
B
1. Set to the test mode. (see page 13)
Adjust RV2 on TU100
2. Push the
for minimum reading.
3. Push the
C
D
Adjust RV2 on TU100
for minimum reading.
SHUF
4. Adjust with the volume RV1 on TU100 so that the "MW" in-
SHUF
Adjustment Location: See page 17.
button: MW
generator
AM dummy antenna
(50 Ω )
: 33 dB (44.7 µ V)
[TUNER]
button and set to FM.
[MODE]
button and set to MW.
Display
dication turns to "MW0" indication on the display window.
But, in case of already indicated "MW0", turn the RV1 so that
put out light "0" indication and adjustment.
Display
30 Ω 15 pF
65 pF
set
antenna jack (ANT100)
TP
TP