Table of Contents
Advertisement
Changing the MENU settings
Icon/item
Mode
WORLD TIME
BEEP
r MELODY
COMMANDER
r ON
DISPLAY
r LCD
REC LAMP
r ON
INDICATOR
r BL OFF
In more than 5 minutes after removing the power source
The "COMMANDER" and "HiFi SOUND" items are returned to their factory settings.
The other menu items are held in memory even when the battery is removed, as long as the lithium
battery is installed.
Note
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the MENU settings, the picture from a
TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on
the TV or VCR.
Notes on INDICATOR
•When you select "BL ON", battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, "BL ON" is automatically selected.
Meaning
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The clock
changes by the time difference you set here. If you
set the time difference to 0, the clock returns to the
originally set time.
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder
NORMAL
To output the beep instead of the melody
OFF
To cancel the melody and beep sound
To activate the Remote Commander supplied with
your camcorder
OFF
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR's
remote control
To show the display on the LCD screen and
viewfinder
V-OUT/LCD
To show the display on the TV screen, LCD screen
and viewfinder
To light up the camera recording lamp at the front
of your camcorder
OFF
To turn the camera recording lamp off so that the
subject is not aware of the recording
To turn off the backlight on display window
BL ON
To turn on the backlight
POWER
switch
CAMERA
VTR
CAMERA
VTR
CAMERA
VTR
CAMERA
CAMERA
VTR
CAMERA
83
Hide quick links:
Advertisement
Table of Contents
