Disp Output - Sony Handycam DCR-HC47E Operating Manual

STANDARD SET menu (Continued)
b Notes
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a "Memory Stick Duo" are played
back.
• In the [DATE/TIME] data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [-- -- -
---] and [--:--:--] will appear.
• During Easy Handycam operation, you can set
[DATE/TIME] only.
REMAINING
B AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch
ON
Always displays the remaining tape
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 88).
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
BEEP
B ON
A beeping sound starts when you start/stop
recording, or operate the touch panel.
OFF
Cancels the beeping sound and shutter
sound.
48
(Play/Pause).

DISP OUTPUT

B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
MENU ROTATE
B NORMAL
Scrolls the menu items downwards by
touching .
OPPOSITE
Scrolls the menu items upwards by
touching .
A.SHUT OFF (Auto shut off)
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
socket, [A.SHUT OFF] is automatically set to
[NEVER].
CALIBRATION
See page 79.