Step 2: Charging The Battery Pack - Sony Handycam DCR-HC47E Operating Manual

Step 2: Charging the battery pack

1
2
Battery pack
To the wall socket
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 76) after
attaching it to your camcorder.
b Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than the H series to your camcorder.
1
Align the terminals of the battery
pack and your camcorder (1),
then attach the battery pack and
click it into place (2).
2
Slide the POWER switch to OFF
(CHG) (The default setting).
3
With the v mark on the DC plug
facing up, connect the AC
Adaptor to the DC IN jack on the
Handycam Station.
8
1
DC IN jack
Mains lead
5
DC plug
3
4
4
Connect the mains lead to the AC
Adaptor and the wall socket.
5
Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged. Remove your camcoder from
the Handycam Station.
CHG (charge) lamp
2
POWER
switch
AC Adaptor