Sony Handycam DCR-HC47E Operating Manual page 52

Digital video camera recorder
Hide thumbs Also See for Handycam DCR-HC47E:
Table of Contents

Advertisement

Dubbing to VCR or DVD/HDD recorders (Continued)
b Notes
• When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
• When you connect a device via an A/V
connecting cable, set [DISP OUTPUT] to [LCD
PANEL] (the default setting) (p. 48).
• While your camcorder is sending signals to
another device via an i.LINK cable,
appears on the LCD screen on your
camcorder.
1
Prepare your camcorder for
playback.
Insert the recorded cassette.
Slide the POWER switch repeatedly to
turn on the PLAY/EDIT lamp.
2
Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the appropriate input
(such as video input1, video input2).
3
Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) 1,
an A/V connecting cable with S
VIDEO (optional) 2 or an i.LINK
cable (optional) 3.
Connect your camcorder to the input
jacks of the recording device.
4
Start playback on the camcorder,
and recording on the recording
device.
52
Refer to the operating instructions
supplied with your recording device for
details.
5
When dubbing is complete, stop
your camcorder and the
recording device.
b Notes
• Set [TV TYPE] according to the playback
device (TV, etc.) when connecting with the A/V
connecting cable.
• To record the date/time and camera settings data
when connected by the A/V connecting cable,
display them on the screen (p. 47).
• The following cannot be output via the
Interface (i.LINK):
– Indicators
– Pictures edited using [PICT.EFFECT] (p. 42),
[D.EFFECT] (p. 41) or PB zoom (p. 24).
• When connected using an i.LINK cable, the
recorded picture becomes rough when a picture
is paused on your camcorder while recording.
• When connected using an i.LINK cable, data
code (date/time/camera settings data) may not
be displayed or recorded depending on the
device or application.
DV

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam dcr-hc48e

Table of Contents