Zoom Display; Disp Output - Sony HVR-Z1E Operating Instructions Manual

OPPOSITE
DATA CODE
Select the item to be displayed when you press DATA CODE (p. 52).
GDATE/CAM
DATE
LETTER SIZE
GNORMAL
2x
REMAINING
GAUTO
ON

DISP OUTPUT

GLCD PANEL
V-OUT/PANEL
Note
b
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO or the
ASSIGN button assigned to the DISPLAY function while [V-OUT/PANEL] is selected.

ZOOM DISPLAY

GBAR
NUMBER
Select to rotate counter clockwise when looked at from the lens side
to close the iris and decrease the light volume.
Select to display the date and time, or the camera settings data during
playback.
Select to display the date and time during playback.
Select to display the menu screen at normal size.
Select to display the selected menu item at double the normal height.
Select to display the remaining tape indicator for about 8 seconds:
• After you set the POWER switch to CAMERA or VCR with a
cassette inserted, and your camcorder calculates the remaining
amount of tape.
• After you press N (play) or DISPLAY/BATT INFO.
Select to always display the remaining tape indicator.
Select to show indicators such as the time code on the LCD screen and
in the viewfinder.
Select to show indicators such as the time code on the TV screen, LCD
screen, and in the viewfinder.
Select to indicate the zoomed position using the bar display.
Select to indicate the zoomed position using numbers (0 through 99).
,continued
81
Using the Menu