Led Indicator On The Product - Husqvarna Automower 550 EPOS Operator's Manual

6.5 LED indicator on the product

The LED indicator on the control panel of the product shows the current product status:
LED indicator light Product status
Constant green The product cuts the lawn or moves out of the charging station.
Flashes green The product is in
Flashes red The product stopped because of an error.
Constant yellow The STOP button was pushed.
Flashes yellow The PIN code must be entered to start the product.
Constant blue The product moves to the charging station or a maintenance point.
An app is connected to the product with Bluetooth
seconds.
Pulsates blue The product charges in the charging station.
Flashes blue The product is parked in charging station.
The product can at this time find Bluetooth
Constant white The product is in appDrive mode.
Pulsates white The product sets to OFF.
Firmware installation is in progress.
Flashes white New firmware must be installed.
There is more information on www.husqvarna.com. Speak to your local Husqvarna representative for more
information.
1576 - 004 - 16.11.2021
Pause mode.
®
and connect with Bluetooth
®
, the LED indicator is constant blue for 3
®
.
Troubleshooting - 35