Note:
The position of the waypoint when you install a
work area or a stay-out zone is in the front left corner of
the product.
Note:
The position of the waypoint when you install a
transport path or a path to a maintenance point is in the
middle of the product between the drive wheels.
•
Make sure that the status is
appDrive.
•
Select the object you want to install and use the
buttons in the appDrive installation to operate the
product.
•
Use the up button (A) to move the product forward.
•
Use the down button (B) to move the product
rearward.
•
Use the left arrow button (C) to rotate the product
to the left.
•
Use the right arrow button (D) to rotate the product
to the right.
•
Use the center button (E) as a joystick to move
and rotate the product in any direction.
•
Use the waypoint button (F) to add a waypoint in
the map.
18 - Installation
Note:
when you operate the product with appDrive.
To make a work area
Minimum 3 waypoints are necessary to make a work
area.
•
•
EPOS confirmed in the
•
A
E
C
D
B
Walk 2-3 m / 6.5-9.8 ft. behind the product
Operate the product clockwise around the
boundary of the work area.
Add waypoints on the map. Add the waypoints
minimum 3 cm / 1 in. from obstacles.
Put the product to straddle the edge between the
lawn and the stone path if it is less than 1 cm / 0.4
in. high when you add a waypoint.
1576 - 004 - 16.11.2021
F