Alcatel SPEED TOUCH HOME User Manual page 23

2.2 Check your SP's Service Offerings
Service Offering
Packet Service
configuration
3EC 17058 AAAA TCZZA Ed. 04
All manuals and user guides at all-guides.com
The SP provides at least the following information:
The VPI/VCI of the Virtual Channel (VC) to use on the DSL
"
line
The Packet Service supported on this VC
"
The Encapsulation Method (if different from the Connection
"
Service's default encapsulation)
User name and Password for your User Account (if needed).
"
Your STHome supports multiple simultaneous VCs on the DSL
line. If your SP exploits this capability, he will provide this
information per VC.
Example 1:
VPI/VCI = 0/35
"
Packet Service = Transparent Bridging
"
Encapsulation Method : Bridge default, i.e. LLC/SNAP
"
Example 2:
VPI/VCI = 8/48
"
Packet Service = PPPoA to PPTP Relaying (RFC2364 PPPoA)
"
Encapsulation Method : pptp default, i.e. VC MUX
"
User name : John_Doe
"
Password for this User name : doejohn
"
As soon as you know the Packet Service supported on a VC, you
can configure your STHome, if needed.
Following combinations are possible:
Connection Service
RFC1483 Bridging g g
RFC2364 PPPoA
(*) A PPPoE Client application must be installed on your PC.
(**) A PPTP Dial Up application must be installed on your PC.
2 Speed Touch Configuration Guide
Packet Service
bridge - Transparent Bridging
bridge - Bridged PPPoE (*)
pptp - Relayed PPPoA (**)
23 / 104