Table of Contents
Advertisement
Installation
Switch Wiring Diagram
Cable Hook Stopper Installation and Use
1.
Freespool winch and pull out approx. 2 feet of synthetic rope.
2.
Assemble cable hook stopper as shown to the right with the flat
portion of the two halves resting against your fairlead. Tighten
fasteners.
3.
To stow hook, engage clutch and retract synthetic rope onto
winch spool until hook is snug against the hook stopper and
fairlead
4.
Position hook stopper at approx. ¾ of the total line
distance towards hook while using your winch to
help reduce whip back in the event of synthetic
rope breakage.
SE35
9
Advertisement
Table of Contents
