Charging The Earphones With The Charging Cradle - Panasonic Technics EAH-AZ60 Owner's Manual

3
Confirm that the charging cradle LED (cyan) has flashed. (charging starts)
• While charging the earphones, the charging cradle LED (cyan) flashes when the lid of the charging cradle is
opened.
• While charging the cradle, the charging cradle LED (green, yellow or red) lights when the lid of the charging
cradle is closed.
• Charging time (The time required to charge the batteries from empty to full)
Earphones
Charging cradle
Earphones with Charging cradle
Note
• Do not use any other USB charging cords except the supplied one. Doing so may cause malfunction.
• Charging may not be performed or may stop if the computer is in or switched to standby or sleep mode.

Charging the earphones with the charging cradle

Earphones can only be charged with a charged charging cradle. You can charge your earphones while you are
out, even if there is no power source.
• When the charging cradle is fully charged, it can charge the earphones about 2 times.
1
Put the earphones into the charging cradle.
• When the earphones are inserted, the charging cradle LED (cyan) flashes twice. If it is not flashing, the
earphones are not inserted correctly.
2
Confirm that the charging cradle LED (cyan) has flashed. (charging starts)
• While charging the earphones, the charging cradle LED (cyan) flashes about 4 seconds when the lid of the
charging cradle is opened.
• It takes approx. 2 hours to charge the earphones from empty to full.
Preparation
Approx. 2 hours
Approx. 2.5 hours
[EAH-AZ60] Approx. 3.5 hours
[EAH-AZ40] Approx. 3 hours
16