Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Panasonic Technics EAH-AZ60
Summary of Contents for Panasonic Technics EAH-AZ60
- Page 1 EAH-AZ60 EAH-AZ40 Digital Wireless Stereo Earphones Owner’s Manual...
-
Page 2: Important Safety Instructions
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Register online at http://shop.panasonic.com/support (U.S. customers only) If you have any questions, visit: In the U.S.A.: http://shop.panasonic.com/support In Canada: www.panasonic.ca/english/support... - Page 3 Supplier’s Declaration of Conformity [EAH-AZ60] [EAH-AZ40] Trade Name: Technics Trade Name: Technics Model No.: EAH-AZ60 Model No.: EAH-AZ40 Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support THE FOLLOWING APPLIES ONLY IN CANADA. CAN ICES-3(B)/NMB-3(B)
- Page 4 ∫ Unit WARNING: To reduce the risk of fire, electric shock or product damage, • Do not expose this unit to rain, moisture, dripping or splashing. • Use only manufacturer’s recommended accessories. • Do not remove covers. • Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid the use in the following conditions •...
- Page 5 ∫ Earphones/Earpieces • Keep the earphones and the earpieces out of reach of children and pets to prevent swallowing. After use, put them in the charging cradle and close the lid for storage. • Securely attach the earpieces. If they are left in the ears after coming off, injury or sickness may be caused. •...
-
Page 6: About Bluetooth
® About Bluetooth Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This unit uses the 2.4 GHz frequency band. ∫ Certification of this unit • This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. -
Page 7: Notes On Ldac
Notes on LDAC [EAH-AZ60] The LDAC setting of this unit is disabled at the time of purchase. Enable the setting to enjoy LDAC. The LDAC setting can be changed with the “Technics Audio Connect” app (free of charge). (Set in [SETTINGS] # [Connection mode] on the app. Follow the on-screen instructions to operate.) The audio codec settings on the playback device may also need to be changed. -
Page 8: Table Of Contents
Table of contents IMPORTANT SAFETY INSTRUCTIONS ....................2 Safety precautions ............................2 ® About Bluetooth ............................6 Notes on LDAC ............................7 Before use Accessories ..............................9 Maintenance..............................9 (Important) About water resistance ......................10 How to fit the earphones ..........................11 •... -
Page 9: Before Use
Before use Expressions used in this document • Pages to be referred to are indicated as “ ±±”. • The product illustrations may differ from the actual product. • Unless otherwise indicated, illustrations in these operating instructions are of EAH-AZ60. Marks denoting model names •... -
Page 10: (Important) About Water Resistance
Before use (Important) About water resistance Specifications for this unit are equivalent of IPX4 of IEC 60529, the protection level of electronic device enclosures that protects from splashes, and is not designed to be totally waterproof. ∫ About IPX4 (liquid ingress protection level against splashing water) This unit is compatible to operate after splashing from nozzles approximately 1.8 L/min (0.5 gal/min) of room temperature tap water from every direction approximately 20 cm (8 in) from this unit for 10 minutes. -
Page 11: How To Fit The Earphones
Before use How to fit the earphones Fit the earphones correctly in order to get adequate noise cancelling effect and acoustics. Select and fit the special earpieces that suit the sizes of your ears, left and right. How to fit the earphones Check the orientation and L (left) and R (right) of the earphones. -
Page 12: Tips For Better Sound Quality (Changing Earpieces)
Before use Tips for better sound quality (Changing earpieces) Properly fit earpieces are essential for optimal sound and noise cancellation ([EAH-AZ60] only). Choose the size that fits snugly in your ears. (The earpiece size that fits best may be different for the left and right ears.) How to remove the earpieces How to attach the earpieces •... -
Page 13: Part Names
Before use Part names Main unit (earphones) (“Earphones” hereafter in the instructions) [EAH-AZ60] [EAH-AZ40] A L side earphone (left) B R side earphone (right) [EAH-AZ60] Microphone for noise cancelling Microphones for calls [EAH-AZ40] Microphone for external sounds Raised dot indicating the L side Touch sensor (L) (left) Charging terminals... - Page 14 Before use Main unit (charging cradle) (“Charging cradle” hereafter in the instructions) Charging cradle Rear Open the lid. 10 Charging cradle lid 14 Charging cradle LED 11 Certification information label 15 Charging terminal • The model number is shown on the certification •...
-
Page 15: Preparation
Preparation Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. • Proper charging is not possible if there is dust or droplets of water on the charging terminal and the terminal sections of the earphones or charging cradle. -
Page 16: Charging The Earphones With The Charging Cradle
Preparation Confirm that the charging cradle LED (cyan) has flashed. (charging starts) • While charging the earphones, the charging cradle LED (cyan) flashes when the lid of the charging cradle is opened. • While charging the cradle, the charging cradle LED (green, yellow or red) lights when the lid of the charging cradle is closed. -
Page 17: Battery Level Notification
Preparation Battery level notification The LEDs lighting or flashing on this unit indicate the remaining battery charge. ∫ Earphones When the battery level starts to run low while you are using the earphones, the blinking earphone LEDs change from blue to red, then you will be notified by one beep every 5 minutes. When no charge remains, you will hear a guidance message and then the unit automatically turns off. - Page 18 Preparation When charging with the earphones stored in the charging cradle (USB charging cord not connected) Charging cradle Charging status *2, 3 Cyan Charging the earphones Green There is plenty of charge in the charging cradle. Open Yellow The charge in the charging cradle is running low. ...
-
Page 19: Turning The Earphones On And Off
Preparation Turning the earphones on and off ∫ To turn the earphones on Take the earphones out of the charging cradle. • The earphones turn on. A beep will sound and the earphone LEDs blink (blue)* slowly. * The batteries are low when they are blinking in red. ∫... -
Page 20: Install The App "Technics Audio Connect
Preparation Install the app “Technics Audio Connect” ® By creating a Bluetooth connection with a smartphone or tablet installed with the “Technics Audio Connect” app (free of charge), you can enjoy a wide variety of features, such as the following: •... -
Page 21: Connecting A Bluetooth ® Device
Preparation ® Connecting a Bluetooth device Preparation • Put the earphones into the charging cradle. ® • Place the Bluetooth device within approx. 1 m (3.3 ft) from the unit. • Check the device operation using its operation instructions as required. ®... -
Page 22: Connecting 2Nd Bluetooth ® Device
Preparation ® Connecting 2nd Bluetooth device Both earphones should be placed temporarily in the charging cradle for 10 seconds. Remove them from the cradle and within 5 seconds while the earphone LED lights (blue), touch and hold the sensor (L or R) for 7 seconds until the LED starts flashing Red/Blue. -
Page 23: Operation
Operation Listening to music ® ® If the Bluetooth compatible device supports the “A2DP” and “AVRCP” Bluetooth profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit. •... -
Page 24: Making A Phone Call
Operation Making a phone call ® ® With Bluetooth enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication using the microphone on the unit. -
Page 25: Using The External Sound Control
Operation Using the external sound control The external sound control function switches between Noise cancelling and Ambient sound. While wearing the earphones, touch and hold the touch sensor (R) for about 2 seconds. • The mode is switched each time you touch and hold the touch sensor. (A guidance message will notify you of the mode you switched to.) [EAH-AZ60] Noise cancelling... -
Page 26: Useful Functions
Operation Useful functions Using the app “Technics Audio Connect” ® By creating a Bluetooth connection with a smartphone installed with the “Technics Audio Connect” app (free of charge), you can enjoy a wide variety of features, such as changing the settings on the earphones. (l 20) Activating voice functions You can use a touch sensor on the earphone to activate the voice functions (Amazon Alexa, Siri etc.) on your smartphone or similar device. -
Page 27: Creating Multi-Point Connections
Operation Creating multi-point connections ® A maximum of two Bluetooth devices can be connected at the same time. ® For information about the connection and registration of Bluetooth devices and the unit (l 21, ® “Connecting a Bluetooth device”) ® Pair this unit with each of the Bluetooth devices. -
Page 28: Operating With The Touch Sensors
Operation Operating with the touch sensors ® You can operate the touch sensors on the earphones to change to the Bluetooth pairing mode, or remote ® control the Bluetooth device. ® • Depending on the Bluetooth device or the app, even if you operate the touch sensors on the earphones, some functions may not respond or may operate differently from the descriptions below. -
Page 29: Other
Other Restoring to the factory settings When you want to delete all pairing device information, etc. in the earphones, you can restore the earphones to the factory settings (original settings upon purchase). Put both earphones (L and R) into the charging cradle to charge the earphones fully. Take the R side earphone out of the charging cradle. -
Page 30: Copyright, Etc
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. Apple, the Apple logo and Siri are trademarks of Apple Inc., registered in the U.S. and other countries. -
Page 31: Troubleshooting
Other Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory”* if you reside in the U.S.A., or refer to “CONTACT INFORMATION”* if you reside in Canada, or consult your dealer for instructions. -
Page 32: General
Other General Cannot operate the earphones. • Try turning the power off and on. (After placing once into the charging cradle and waiting for about 15 seconds, take them out again.) ( • Touch sensor operations may be off. For more details, refer to the operating instructions for the “Technics Audio Connect”... -
Page 33: Status Of The Charging Cradle Led
Other Status of the charging cradle LED Charging cradle LED Discription The charging cradle LED (cyan) There is no charge remaining in the charging cradle battery. does not flash even after putting • First charge the charging cradle. the earphones into the charging cradle. -
Page 34: Specifications
Other Specifications ∫ General EAH-AZ60 EAH-AZ40 Power supply DC 5 V, 500 mA (Charging cradle) Internal Battery Earphones: 3.7 V, Earphones: 3.7 V, Lithium polymer 85 mAh Lithium polymer 55 mAh Charging cradle: 3.7 V, Charging cradle: 3.7 V, Lithium polymer 650 mAh Lithium polymer 450 mAh Approx. - Page 35 Other EAH-AZ60 EAH-AZ40 Call time Approx. 4.0 hours (JMV : ON) Approx. 3.0 hours (JMV : ON) (Earphones) Approx. 5.5 hours (JMV : OFF) Approx. 5.0 hours (JMV : OFF) Waiting Time Approx. 9 hours Approx. 19 hours (Earphones) (Noise cancelling: ON) (Auto power off does not work) Approx.
- Page 36 Other ® ∫ Bluetooth section EAH-AZ60 EAH-AZ40 ® Bluetooth system specification Ver. 5.2 Wireless equipment classification Class 1 Max RF Power 9 dBm Frequency band 2402 MHz to 2480 MHz Supported profiles A2DP, AVRCP, HSP, HFP Supported codec SBC, AAC, LDAC SBC, AAC Operating distance Up to 10 m (33 ft)
-
Page 37: When Disposing Of The Product
Other When disposing of the product The built-in batteries are a valuable recyclable resource. When disposing of this unit, rather than disposing of in general waste (non-combustible garbage), follow the local national laws and take to the appropriate collection point. Contact your local government organization if you are unsure of your local collection point. Refer to the specifications in this document for information about the batteries. -
Page 38: Earpiece Cleaning
Other Earpiece cleaning Regular cleaning is necessary to continue using the earpieces comfortably. Earwax and other foreign matter attached to the holes of the earpieces can change the acoustic characteristics, such as making the sound smaller, and also be the cause of malfunctions. Remove the earpieces. - Page 39 Other ∫ When the earpieces are very dirty Wash the earpieces with the tips of your fingers. (Using a diluted neutral detergent in warm water is effective.) • Do not remove the sponges from the earpieces. Rinse well with clean water after washing. Put in between a soft, dry cloth, press firmly 3 to 5 times to ensure the moisture is eliminated.
- Page 40 Other Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.eu...
-
Page 41: Useful Information (Only For Latin American Countries)
Obtain products information and operative assistant; localize the closer distributor or Service Center; buy spare parts and accessories by our Web Site to Latin America or calling our Contact Center: COUNTRY WEB SITE CONTACT CENTER Panama www.panasonic.com/pa/soporte/ 800-7262 Colombia www.panasonic.com/co/soporte/ 01-8000-947262 Ecuador www.panasonic.com/pa/soporte/... - Page 42 • Monday–Friday 9:00 am–5:00 pm (Excluding public holidays). • For further support on your product, please visit our website: www.technics.com/uk/ Importer for UK Panasonic UK, a branch of Panasonic Marketing Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Manufactured by: Panasonic Corporation...