Code Alarm PROFESSIONAL Series Installation Manual page 18

Security and keyless entry
Hide thumbs Also See for PROFESSIONAL Series:
Table of Contents

Advertisement

4 - System Notifications: This feature selects which output(s) will sound the
system's arm/disarm chirps. This feature does not effect the triggered state of the
security system and during a triggered cycle, both the siren and horn outputs will
activate respectively.
Siren & Horn – Siren and horn both sound when arming/disarming the system.
Siren Only – Only the siren will sound when arming/disarming the system.
Horn Only - Only the horn will sound when arming/disarming the system.
5 - Alarm Duration: Determines the length of time the system will sound the siren/
horn during a full trigger event.
30 Seconds – When triggered, the system will sound the siren/horn for 30
seconds then stop. The unit will remain armed and may be triggered again.
60 Seconds – When triggered, the system will sound the siren/horn for 60
seconds then stop. The unit will remain armed and may be triggered again.
6 - Security: Controls security functionality - ON / OFF.
ON - Full security functionality.
OFF - The security system does not trigger. Panic and all other convenience
features operate as normal.
ON w/OEM Remote Start Compatibility - This will prevent a vehicle's factory
remote start from triggering the security system when activated. The system
will use the ignition input to shunt shock and door inputs until 5 seconds after
they clear. If the alarm is triggered prior to ignition on, then ignition will not
shunt/cancel the alarm's triggered state. Also, note that the ignition input will no
longer serve as a trigger if this option is selected on.
7 - Anti-Hijack Mode: Controls Car Jack mode - ON / OFF.
OFF - Standard security system operation.
ON - Enables Car Jack mode functionality as described in the owners
manual
8 - Ground While Armed / Orange Output: Controls the output of the orange wire.
This wire will either supply a ( - ) output when armed OR disarmed.
9 - DBI Port Protocol: Determines the protocol type in which the DBI port uses to
interface with external modules.
DBI Protocol
ADS Protocol
18
ca1155 rev B

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PROFESSIONAL Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Ca1155

Table of Contents