Advertisement
Quick Links
Operation Manual
Toilet Waste Water Pump
62738
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec XPOtool 62738
Summary of Contents for WilTec XPOtool 62738
- Page 1 Operation Manual Toilet Waste Water Pump 62738 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Introduction Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli- ents take some basic safety precautions when using this device. Please read the operation in - structions carefully and make sure you have understood its content. Keep these operation instructions safe.
- Page 4 Technical specifications Power (W) Voltage (V) 220–240 Frequency (Hz) Max. pump head (m) Max. draw (m) Max. water temperature ( ℃ Max. flow rate ( ℓ ⁄min Heat protection ( ℃ Protection class IPX4 Main components № Name № Name ⌀...
- Page 5 Figure 1: Size Figure 2: Spare parts https://www.XPOtool.com Item 62738 Page 5 The Tool Experts 2021-1...
- Page 6 Figure 3: Mounting An outlet check valve is required. Install an additional manual check valve for repair (suggestion). Use a filter in the shower and toilet to prevent hair from getting into the device. Figure 4: Connections https://www.XPOtool.com Item 62738 Page 6...
- Page 7 Figure 5: Optional intake for additional equipment Figure 6: Intake cover Cover all intakes that are not used. https://www.XPOtool.com Item 62738 Page 7 The Tool Experts 2021-1...
- Page 8 Figure 7: Fixations Figure 8: Outlet (non-return valve) The non-return valve being only 1–2 cm in size, avoid inserting it too far. https://www.XPOtool.com Item 62738 Page 8 The Tool Experts 2021-1...
- Page 9 Figure 9: Maintenance flap Open the upper maintenance flap. You can easily take out the block near the blade. Figure 10: Heads and draws https://www.XPOtool.com Item 62738 Page 9 The Tool Experts 2021-1...
- Page 10 Figure 11: Flow rates Figure 12: Distance from the wall The minimum distance between the toilet outlet and the rear wall is 245 mm. https://www.XPOtool.com Item 62738 Page 10 The Tool Experts 2021-1...
- Page 11 Figure 13: Elbow fittings We recommend two 45° elbow fittings instead of one 90° elbow fitting. Figure 14 and 15: Outlet tube connection https://www.XPOtool.com Item 62738 Page 11 The Tool Experts 2021-1...
-
Page 12: Installation
Functional principle The device is designed to pump wastewater from toilets and other sanitary facilities. It consists of an electric pump (D) automatically controlled by a float switch (C). The emptying process is triggered like with a conventional toilet by pressing the flush (see ill.). ... - Page 13 Technical advice on drain pipes Horizontal pipes must have a gradient of at least 1:200 (5 ⁄ ) to the floor shaft. If a vertical lift is required, this must be done before the horizontal run at the beginning of the ...
- Page 14 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
Need help?
Do you have a question about the XPOtool 62738 and is the answer not in the manual?
Questions and answers