Advertisement
Quick Links
Operation Manual
Fuel Oil Pump and Diesel Pump
50588, 50589, 50591,50592, 50747, 50748, 50767, 50958, 51486, 51564, 62132, 62133, 62137
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificant-
ly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 50588
Summary of Contents for WilTec 50588
- Page 1 Operation Manual Fuel Oil Pump and Diesel Pump 50588, 50589, 50591,50592, 50747, 50748, 50767, 50958, 51486, 51564, 62132, 62133, 62137 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time.
- Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • The pump must not convey aggressive fluids (acids, alkali, etc.) or fluids with abrasive sub- stance (sand). It must NOT pump water or easy flammable liquids (petrol). © by WilTec Wildanger Technik GmbH Item 50588 and others Page 3 http://www.WilTec.de...
- Page 4 • The suction valve should lie deeply enough in the medium to be pumped. This way the drop in the fluid level prevents the pump from dry running. © by WilTec Wildanger Technik GmbH Item 50588 and others Page 4 http://www.WilTec.de...
- Page 5 Filling the pump is completed when the pump body is fully filled as well. After this, the filler hole has to be closed and the pump should now convey (pump) again. © by WilTec Wildanger Technik GmbH Item 50588 and others Page 5 http://www.WilTec.de...
-
Page 6: Troubleshooting
Engine overloaded – excessive friction through Disassemble and clean pump, prevent suction foreign particles of foreign particles (filter). Attention! The pump must not run dry. © by WilTec Wildanger Technik GmbH Item 50588 and others Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1... - Page 7 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.
Need help?
Do you have a question about the 50588 and is the answer not in the manual?
Questions and answers