Table of Contents
Advertisement
List the type and size of the tools that would typically can be used to disassemble the product to a point
where components and materials requiring selective treatment can be removed.
Tool Description:
‐ Screwdriver (Phillip-head, Hexagonal head)
‐ Penknife
3.1Disassembly Procedures
Tools: 2 Power screwdrivers (φ=5mm, L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=6 kgF.Cm
Step
Remove the
Base ass'y.
Remove the
rear cover
Figure
TOOl
Remark
Use the tip of the
screw
press
button and pull out
the stand.
Note:
Put the monitor on a
flat, soft and clean
surface.
Unscrew the 6
screws by the
Philips-head
Screwdriver.
Torque=6±1kgf.cm
driver
to
the
hidden
Advertisement
Table of Contents
