Some features may not be available in certain countries. NOTE: To set up with any other stand, see the documentation that shipped with the stand. Monitor Stand riser Stand base Power cable (varies by country) VGA cable (SE2419H and SE2719H) About your monitor...
Quick Setup Guide Safety and Regulatory Information Product features The Dell SE2419H/SE2419HX/SE2719H/SE2719HX at panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD), anti-static, and LED backlight. The monitor features include: SE2419H/SE2419HX: 60.45 cm (23.8 inch) diagonal viewable area display (measured diagonally).
Identifying features and controls Front view Label Description Function buttons To access the OSD menu and change the settings if required. (For more information, see Using the front panel controls) Power On/Off button To turn the monitor On or Off. (with LED indicator) About your m...
Page 8
Regulatory label, barcode, serial List the regulatory approvals. See this number, and Service Tag label label if you need to contact Dell for technical support. The Service Tag is a enables Dell service technicians to identify the hardware components in your computer and access warranty information.
Page 9
Bottom view, without monitor stand SE2419H/SE2419HX/SE2719H/SE2719HX Label Description Power port To connect the monitor power cable. For connection to your computer using HDMI cable. HDMI port For connection to your computer using VGA cable. VGA port About your monitor...
Normal mode 5 ms Fast mode Color depth 16.7 million colors Color gamut CIE 1931 (72%) Dell display manager compatibility One VGA port and one HDMI 1.4 (HDCP 1.4) port with Connectivity SE2419H/SE2419HX/SE2719H/SE2719HX monitors. Bezel width (edge of 6.2 mm (Top) 6.8 mm (Top)
Page 11
Resolution speci cations Model SE2419H/SE2419HX SE2719H/SE2719HX Horizontal scan range 30 kHz to 83 kHz (automatic) Vertical scan range 56 Hz to 76 Hz (automatic) Maximum preset resolution 1920 x 1080 at 60 Hz Preset display modes SE2419H/SE2419HX/SE2719H/SE2719HX Display Mode Horizontal...
Page 12
Electrical speci cations Model SE2419H/SE2419HX SE2719H/SE2719HX Analog RGB: 0.7 Volts ± 5 %, Video input signals 75 ohm input impedance HDMI 1.4 (HDCP 1.4), 600mV for each differential line, 100 ohm input impedance per differential pair Synchronization Separate horizontal and vertical synchronizations,...
Page 13
Stand dimensions: SE2419H / SE2419HX SE2719H / SE2719HX 171.6 mm (6.76 in.) 176.7 mm (6.96 in.) Height Width 257.2 mm (10.13 in.) 249.0 mm (9.80 in.) Depth 152.8 mm (6.02 in.) 186.8 mm (7.35 in.) Weight: SE2419H/SE2419HX SE2719H / SE2719HX With packaging 5.59 kg (12.32 lb)
Page 14
The following table shows the power consumption and signaling of this automatic power saving feature. * Zero power consumption in o mode can only be achieved by disconnecting the power cable from the monitor. SE2419H/SE2419HX VESA Horizontal sync Vertical sync Video Power Power...
Page 15
The OSD functions only in the normal operation mode. When any button is pressed in the Active-off mode, one of the following messages will be displayed: SE2419H Dell 24 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes.
Page 16
SE2719H Dell 27 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719H SE2719H SE2719HX Dell 27 Monitor No HDMI Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719HX SE2719HX Activate the computer and the monitor to gain access to the OSD.
During the LCD Monitor manufacturing process, it is normal for one or more pixels to become fixed in an unchanging state which are hard to see and do not affect the display quality or usability. For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at www.dell.com/support/monitors.
Setting up the monitor Connecting the stand NOTE: The stand is not attached when the monitor is shipped from the factory. NOTE: The following procedure is applicable for the stand that shipped with your monitor. To attach the monitor stand: Connect the stand riser to the stand base, and then tighten the screw on the stand base.
Page 19
3. Slide the stand assembly until it snaps into place. Setting up the monitor...
Connecting your monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. NOTE: Do not connect all cables to the computer at the same time. It is recommended to route the cables through the cable-management slot before you connect them to the monitor.
Organizing cables Use the cable-management slot to the cables connected to your monitor. Removing the stand NOTE: To prevent scratches on the screen when removing the stand, ensure that the monitor is placed on a soft and clean surface. NOTE: The following procedure is applicable for the stand that shipped with your monitor.
Page 22
3. Using a long screwdriver press the release button. 4. While keeping the release button pressed, pull the stand out. Setting up the monitor...
Operating your monitor Turning on the monitor Press the button to turn on the monitor. Using the front panel controls Use the control buttons at the bottom edge of the monitor to adjust the image being displayed. 2 3 4 The following table describes the control buttons: Control Buttons Description...
Page 24
For direct access to the Brightness and Contrast menu. Brightness/Contrast To launch the On-Screen Display (OSD) menu, or to access the list of items / options of a menu item. For more information, see Accessing the OSD menu. Menu To exit or return to the OSD main menu. Exit To turn the monitor on or off.
OSD menu, or wait for the OSD menu to close automatically. 1. Press the button to display the OSD main menu. Main menu for HDMI input Dell 24 Monitor Brightness / Contrast Auto Adjust Input Source Color...
Page 26
Icon Menu and Description Submenus Brightness/ Use this option to control the brightness or contrast settings. Contrast Dell 24 Monitor Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others Dell 27 Monitor Brightness / Contrast Auto Adjust...
Page 27
Use this option to activate automatic setup and adjust menu. Auto Adjust Dell 24 Monitor Brightness / Contrast Auto Adjust Input Source Color Display Menu Personalize Others Dell 27 Monitor Brightness / Contrast Auto Adjust Input Source Color Display Menu...
Page 28
Use the input source menu to switch between the different Input Source video signals that may be connected to your monitor. SE2419H/SE2419HX: one VGA and one HDMI input Dell 24 Monitor Brightness / Contrast Auto Adjust HDMI Input Source Auto Select...
Page 29
Select Auto Select to scan for available input signals. Auto Select Reset Input Select this option to restore default input source. Source Color Use color to adjust the color setting mode. Dell 24 Monitor Brightness / Contrast Preset Modes Standard Input Color Format Auto Adjust Input Source...
Page 30
Custom Color: Allows you to manually adjust the color settings. Press the buttons to adjust the three colors (R, G, B) values and create your own preset color mode. Dell 24 Monitor Preset Modes Brightness / Contrast Standard Auto Adjust...
Page 31
RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable. YPbPr: Select this option if your DVD player supports only YPbPr output. Dell 24 Monitor Preset Modes Brightness / Contrast Auto Adjust...
Page 32
NOTE: Saturation adjustment is available only when you select Movie or Game preset mode. Reset Color Reset your monitor color settings to the factory settings. Display Use the display to adjust image. Dell 24 Monitor Brightness / Contrast Aspect Ratio Wide 16:9 Auto Adjust Horizontal Position...
Page 33
Dell 27 Monitor Brightness / Contrast Aspect Ratio Wide 16:9 Auto Adjust Horizontal Position Input Source Vertical Position Sharpness Color Pixel Clock Display Menu Phase Dymanic Contrast Personalize Others Dell 27 Monitor Brightness / Contrast Response Time Auto Adjust Normal...
Page 34
Menu Select this option to adjust the settings of the OSD, such as the languages of the OSD, the amount of time, the menu remains on screen and so on. Dell 24 Monitor Brightness / Contrast English Language Auto Adjust...
Page 35
Allow you to choose a feature from Shortcut key 1, Shortcut key 2, Power Button LED or Reset Personalization, Preset Modes or Brightness/Contrast and set it as a shortcut key. Dell 24 Monitor Brightness / Contrast Shortcut Key 1 Preset Modes...
Page 36
Factory Reset Personalize Others Display Info Press to display the information about the display. SE2419H: Dell 24 Monitor Brightness / Contrast Model: Dell SE2419H Display Info DDC/CI Auto Adjust Input Source: VGA Input Source LCD Conditioning Current: 1920x1080, 60Hz Service Tag...
Page 37
SE2419HX: Dell 24 Monitor Brightness / Contrast Model: Dell SE2419HX Display Info DDC/CI Auto Adjust Input Source: HDMI Current: 1920x1080, 60Hz Input Source LCD Conditioning Service Tag Color Display Reset Others Menu Factory Reset Personalize Others SE2719H: Dell 27 Monitor...
Page 38
Select O to turn o this feature. Enable this feature for best user experience and optimum performance of your monitor. Dell 24 Monitor Brightness / Contrast Display Info Auto Adjust...
Page 39
Help reduce minor cases of image retention. Depending on Conditioning the degree of image retention, the program may take some time to run. To start LCD Conditioning, select On. Dell 24 Monitor Display Info Brightness / Contrast Auto Adjust DDC/CI...
Page 40
Dell 27 Monitor Display Info Brightness / Contrast DDC/CI Auto Adjust Input Source LCD Conditioning Color Service Tag ABCDEFG Reset Others Display Menu Factory Reset Personalize Others Reset all settings under the Others setting Reset Other menu to the factory default.
Page 41
When the Dynamic Contrast feature is enabled (in Movie or Game preset modes), the manual brightness adjustment is disabled. SE2419H Dell 24 Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched o . Do you want to continue?
Page 42
SE2719H Dell 27 Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched off. Do you want to continue? SE2719H SE2719HX Dell 27 Monitor To allow manual adjustment of brightness, the Dynamic Contrast will be switched off.
Page 43
SE2419HX Dell 24 Monitor The function of adjusting display setting using PC application will be disabled. Do you wish to disable DDC/CI function? SE2419HX SE2719H Dell 27 Monitor The function of adjusting display setting using PC application will be disabled.
Page 44
When the monitor enters Power Save Mode, the following message appears. SE2419H Dell 24 Monitor Entering Power Save Mode. SE2419H SE2419HX Dell 24 Monitor Entering Power Save Mode. SE2419HX SE2719H Dell 27 Monitor Entering Power Save Mode. SE2719H SE2719HX Dell 27 Monitor Entering Power Save Mode.
Page 45
If VGA or HDMI cable is not connected, a oating dialog box as shown below appears. The monitor will enter Power Save Mode after 4 minutes if left at this state. SE2419H Dell 24 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes.
Page 46
SE2719H Dell 27 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719H SE2719H SE2719HX Dell 27 Monitor No HDMI Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719HX SE2719HX Troubleshooting for more information.
Use one of the following methods to update the graphics driver: Dell computer Go to www.dell.com/support, enter your service tag, and download the latest driver for your graphics card. After installing the drivers for your graphics adapter, attempt to set the resolution to...
Page 48
Non-Dell computer In Windows 7: Right-click on the desktop and click Personalization. Click Change Display Settings. Click Advanced Settings. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, AMD, Intel etc.). Refer to the graphic card provider website for updated driver (for example, www.AMD.com...
Using tilt You can tilt the monitor for the most comfortable viewing angle. NOTE: The stand is not attached when the monitor is shipped from the factory. Operating your monitor...
If the monitor is working correctly, it detects that there is no signal and one of the following message appears. While in self-test mode, the power LED remains white. SE2419H Dell 24 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes.
Page 51
SE2719H Dell 27 Monitor No VGA Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719H SE2719H SE2719HX Dell 27 Monitor No HDMI Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/SE2719HX SE2719HX NOTE: This box also appears during normal operation, when the video cable is disconnected or damaged.
5. Press Button 1 on the bottom of the monitor again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. www.dell.com/SE2719HX 7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text screens.
Cycle power On-off. ∞ Pixel that is permanently off is a natural defect that can occur in ∞ LCD technology. ∞ For more information on Dell Monitor Quality and Pixel Policy, see Dell Support site at: www.dell.com/support/monitors. Stuck-on pixels ∞...
Page 54
Restart the computer in safe mode. ∞ Safety related issues Do not perform any troubleshooting step. ∞ Contact Dell immediately. ∞ Intermittent problems Ensure that the video cable connecting the monitor to the ∞ computer is connected properly and is secure.
Possible Solutions Screen image is too ∞ Check the Aspect Ratio setting in the Display settings OSD. small ∞ Reset the monitor to Factory Settings (Factory Reset). Cannot adjust the Turn off the monitor, unplug the power cord, plug it back, and then turn on ∞...
3. Click Contact Us on the left side of the page. 4. Select the appropriate service or support link based on your need. 5. Choose the method of contacting Dell that is convenient for you . WARNING: For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
Pin assignments D-Sub 15-pin connector Pin Number Signal Assignment Video-Red Video-Green Video-Blue Self-test GND-R GND-G GND-B DDC +5 V GND-sync DDC data H-sync V-sync DDC clock Appendix...
Page 58
Pin assignments HDMI 19-pin connector Pin Number Signal Assignment TMDS DATA 2+ TMDS DATA 2 SHIELD TMDS DATA 2- TMDS DATA 1+ TMDS DATA 1 SHIELD TMDS DATA 1- TMDS DATA 0+ TMDS DATA 0 SHIELD TMDS DATA 0- TMDS CLOCK+ TMDS CLOCK SHIELD TMDS CLOCK- Reserved (N.C.