Installing the Batteries and Checking the Battery Level
Installing the Batteries
The camera uses two CR2 lithium batteries.
2
For places where CR2 batteries may not be easily available, take spare bat-
teries with you. Also carry spare batteries for extended shooting sessions.
14
1
Open the battery compartment
cover.
•
Slide the cover release lever as
shown by the arrow and open the
battery compartment cover.
1
2
Instal the batteries.
•
Make sure the battery contacts (+
and –) are properly oriented as
shown.
•
Do not mix old and new batteries.
3
Close the battery compartment
cover.
•
Press the cover until it snaps shut.
•
The date and time must be set. See
page 30. (DATE Model only)