Imprinting the Date or Time
Setting the Date and Time
If a picture is taken while the date and time are blinking, the date and time will not
be imprinted on that picture.
The date and time setting can be retained for about 10 min. after the cam-
era's batteries are removed.
30
(DATE Model only)
1
Move the <
•
Look at the LCD panel and press the
<
> button.
If the date and time has not been set,
"
" will blink on the LCD panel.
2
Select the digit to be set.
•
Press the <
•
The digit selection will change in the
following sequence: year, month, day,
hour, minute, " ".
3
Set the correct number.
•
Turn the <
•
Repeat steps
date and time digits are set correctly.
4
Finalize the date and time setting.
•
Keep pressing the <
no digits are blinking.
•
If you press the <
" " is blinking, 0 sec. will be set.
> arrow to <
> button.
> dial.
2
3
and
until all the
> button until
> button while
>.