Turning The Power On; Checking The Battery Level - Canon ELPH Z3 Instructions Manual

Turning the Power On

• Do not push on the lens with your hand.
• If the lens is not set for shooting, check to see if the
battery is loaded correctly. (→ 9)

Checking the Battery Level

Check that
the camera on. Change the battery if
A new battery generally has sufficient capacity for
twenty 25-exposure film cartridges (based on
Canon's Standard Test Method with normal
temperatures and with the flash used for 50% of
shots). At low temperatures (–10°C/14°F), the battery
capacity is approximately one third of normal capacity.
• If you are traveling or intend to take many pictures, take
a supply of spare batteries. The batteries may be
difficult to obtain at your destination.
• If you take a number of consecutive shots using the
flash, the battery level may drop off temporarily and
prevent the LCD panel from displaying data correctly. If
this occurs, switch the camera off and wait a few
minutes before switching it on again.
´-14
Slide open the lens cover.
\ The lens is initially set to the
• When you close the lens cover,
• When you switch the camera off,
appears on the LCD panel when you turn
wide-angle position.
the lens retracts and the camera
turns off.
the display on the LCD panel
does not disappear.
is displayed.