Canon EOS REBEL Ti 300V Date Instructions Manual page 37

The Difference Between <
• The < > and <
aperture settings automatically for picture-taking.
• The following features can be used with <
· Manual AF point selection
· Film advance mode selection
· Program shift
· AE lock with the <
· Exposure compensation
About Program Shift
• In the Program AE mode, you can freely change the shutter speed
and aperture combination (program) set by the camera while
retaining the same exposure. This is called program shift.
• To shift the program, press the shutter button halfway and turn the
< > dial until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted
program is canceled automatically and the original program is
restored.
• Program shift cannot be set when the built-in flash is used.
4 Take the picture.
•
Compose the shot and press the
shutter button fully.
> and <
> modes set the same shutter speed and
> button
>
>, but not with <
· AEB
· Depth-of-field preview
· Multiple exposures
· Built-in flash ON/OFF
>:
37