Installing The Battery And Checking The Battery Level - Canon EOS-1V HS Instructions Manual

Installing the Battery and Checking the Battery Level

Installing the Battery
The battery is housed in the camera grip. Remove the grip to install one
2CR5 lithium battery.
• For the EOS-1V HS, see page 115.
2
Lithium batteries may not be available in certain areas. Carry a spare battery
when going on a trip or when you will use many rolls of film.
1 Remove the grip.
• Use a coin to turn and loosen the grip
screw as shown by the arrow in the
figure. Slide off the grip downward.
1
2 Open the cover.
3
Install the battery.
• Install the battery so that the battery
contacts are on the right and bottom.
Then close the cover.
4 Reattach the grip.
• Reattach the grip to the camera, then
turn the grip screw to tighten
securely.
19