Checking The Film Speed; Unloading Film - Canon EOS REBEL Ti 300V Date Instructions Manual

• The shutter curtains have been manufactured with very high precision.
Never touch them with your fingers. When loading film, do not touch or dam-
age the curtains with your fingers or film.
• In hot and humid environments, do not remove the film packaging until you
are ready to load the film.
• If the film is not loaded properly, the <
and the shutter will not work. Reload the film cartridge properly. (→page 18)
• If you want to set a film speed different from the DX-coded film speed or if
the film cartridge is not DX-coded, see "Setting the ISO Film Speed" on
page 50.
• Infrared film cannot be used with this camera.

Checking the Film Speed

The camera reads the film cartridge's DX code and sets the film speed
automatically within ISO 25 - 5000.
• Set the Command Dial to a Creative Zone mode.

Unloading Film

After the film's last frame is exposed, the camera rewinds the film automatically.
> icon will blink on the LCD panel
Press the <
move the < > arrow to <
the LCD panel.
The film speed will appear on the
LCD panel.
After the film is rewound, there will be a
shutter-release sound. Check that the
< > icon is blinking on the LCD panel,
then open the back cover and take out
the film cartridge.
> button and
> on
19