Searching Using The Index Function - Sony SLV-X9N ShowView Operating Instructions Manual

Searching using the index function

The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
1
Insert an indexed tape into the VCR.
Press ./> INDEX SEARCH.
2
• To search ahead, press > INDEX
• To search backwards, press .
The VCR starts searching, and playback
starts automatically from that point.
To stop searching
Press x STOP.
Notes
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
• When you press . INDEX SEARCH, if there is nothing recorded before the
selected index signal, playback may not start exactly at the index signal.
76 Searching using the index function
SEARCH.
INDEX SEARCH.
INDEX
SEARCH