Sony SLV-X9N ShowView Operating Instructions Manual page 53

3
Press OK.
The date, start and stop times,
PLAY
programme position or station name,
OK
tape speed, and VPS/PDC setting
appear on the TV screen.
INPUT SELECT
• If "– –" appears in the "PROG."
CLEAR
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
PLAY
1 Press </, to highlight the item
OK
2 Press M/m to reset it.
• To record the same programme
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
5
Press MENU to exit the menu.
MENU
Press ?/1 to turn off the VCR.
6
The
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
To stop recording
To stop the VCR while recording, press x STOP.
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the "PROG." position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
you want to change.
every day or the same day every
week, see "Daily/weekly recording" on page 54.
the VPS/PDC function, see "Timer recording with VPS/PDC
signals" on page 54.
indicator appears in the display window and the VCR stands
Recording TV programmes using the ShowView system
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
TIMER
2 8 . 9
DATE TIME
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
continued
FRI
PROG.
3 5
OFF
MENU
FRI
PROG.
3 5
ON
MENU
53