Table of Contents
Related Manuals for Sony POWER TRILOGIC SLV-L49 MX
Summary of Contents for Sony POWER TRILOGIC SLV-L49 MX
- Page 1 3-865-427-12(1) Video Cassette Recorder Operating Instructions SLV-L49 MX SLV-L52 PA/PC SLV-L59 CL/CS/PR/VZ SLV-X55 MX SLV-L69HF MX SLV-L72HF PA/PC SLV-L79HF CL/CS/VZ SLV-L89HF CL/CS/MX/VZ SLV-X66HF MX ©1999 by Sony Corporation...
- Page 2 Safety Information • For SLV-L59 CL/CS/PR, L79HF CL/CS “Power Trilogic” is a trademark of Sony and L89HF CL/CS, operate the unit on 110 Corporation. to 240 V AC, 50/60 Hz. For SLV-L49 MX, L52 PA/PC, L59 VZ, X55 MX, L69HF MX,...
-
Page 3: Table Of Contents
Table of contents Getting Started Step 1: Unpacking Step 2: Setting up the remote commander Step 3: Hookups 24 Selecting a language 25 Setting the clock 31 Presetting channels Basic Operations 62 Adjusting the picture 64 Changing menu options 38 Playing a tape 65 Editing with another VCR 41 Recording TV programs 44 Recording TV programs using the... -
Page 4: Getting Started
Getting Started Step 1 Unpacking Check that you have received the following items with the VCR: • Remote commander • 75-ohm coaxial cable with F-type connectors • Size AA (R6) batteries • Plug adaptor (SLV-L59 CL/CS/PR, L79HF CL/CS and L89HF CL/CS only) •... -
Page 5: Step 2: Setting Up The Remote Commander
Using the remote commander You can use this remote Remote sensor commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with § a dot (•) can be used to operate your Sony TV. - Page 6 Now you can use the 1/u , VOL +/–, CH +/– and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot ( ) to control a Sony TV. To control the VCR, reset TV / VIDEO to VIDEO . Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
-
Page 7: Step 3: Hookups
• Do not connect the AC power cords until all of the connections are completed. • Be sure you make connections firmly. Loose connections may cause picture distortion. • If your TV doesn’t match any of the examples provided, see your nearest Sony dealer or qualified technician. continued Getting Started... - Page 8 Step 3: Hookups (continued) Audio/video (A/V) hookup Pages 8 to 10 If your TV has audio/video (A/V) input jacks, you will get a better picture and sound when you hook up your VCR using these connections. If your TV doesn’t have A/V inputs, see the following pages for antenna or cable hookups.
- Page 9 For SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ and X66HF MX For a true “home theater” experience, you should connect the audio outputs of your VCR or TV to your stereo system. A Use this hookup if your TV has stereo jacks Stereo receiver AUDIO VIDEO LINE-1 IN...
- Page 10 Step 3: Hookups (continued) A/V hookup: VCR setup After you’ve connected your TV and completed antenna or cable hookup, use the following procedure to set up the VCR. Press MENU and select Set AUTO ANT SELECT ADVANCED OPTIONS. to OFF and press OK. ADVANCED OPTIONS TIMER SET/CHECK AUTO ANT SELECT...
- Page 11 Hookup 1 Pages 11 to 13 Antenna hookup Make the following connections if you’re using an antenna (if you don’t have cable TV). A Use this hookup if you’re using: • VHF/UHF antenna (you get channels 2–13 and channels 14 and higher) •...
- Page 12 Step 3: Hookups (continued) Hookup 1: VCR setup Set the RF UNIT switch to RF UNIT CH3 or CH4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 67. If you made A/V connections EASY SET UP (from page 8), you can skip...
- Page 13 3 The TUNER PRESET menu appears. Set SET UP TUNER PRESET ANTENNA/CABLE to ANT and press OK. For ANTENNA / CABLE details, see page 31. CABLE SELECT NEXT CANCEL EASY SET UP 4 The AUTO PRESET starts. SET UP SET UP TUNER PRESET AUTO PRESET SET UP IS DONE...
- Page 14 Step 3: Hookups (continued) Hookup 2 Pages 14 to 16 No cable box, or cable box with only a few scrambled channels Recommended use Use this hookup if you do not have a cable box. Also use this hookup if your cable system scrambles only a few channels.
- Page 15 Hookup 2: VCR setup Set the RF UNIT switch to RF UNIT CH3 or CH4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 67. If you made A/V connections EASY SET UP (from page 8), you can skip this step.
- Page 16 VCR. After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. The VCR sets the clock by picking up time signals provided by Sony Entertainment Television (SETV).
- Page 17 Hookup 3 Pages 17 to 19 Cable box with many scrambled channels Recommended use Use this hookup if your cable system scrambles all or most channels. What you can do with this hookup • Record any channel by selecting the channel on the cable box What you can’t do •...
- Page 18 Step 3: Hookups (continued) Hookup 3: VCR setup Set the RF UNIT switch to RF UNIT CH3 or CH4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 67. If you made A/V connections EASY SET UP (from page 8), you can skip...
- Page 19 Automatic clock setting To use the Auto Clock Set feature with this hookup, you need to manually select Sony Entertainment Television (SETV). Tune the cable box to SETV. Select AUTO in the CLOCK SET menu to turn on the Auto Clock Set feature.
- Page 20 Step 3: Hookups (continued) Hookup 4 Pages 20 to 23 Cable box with only a few scrambled channels, using an A/B switch Recommended use By using an A/B switch (not supplied), this hookup allows you to record both scrambled and unscrambled channels conveniently. What you can do with this hookup •...
- Page 21 Hookup 4: VCR setup Set the RF UNIT switch to RF UNIT CH3 or CH4, whichever channel is not used in your area. If both are used, set the switch to either channel. For details, see page 67. If you made A/V connections EASY SET UP (from page 8), you can skip this step.
- Page 22 Step 3: Hookups (continued) 4 The TUNER PRESET menu appears. Set SET UP TUNER PRESET ANTENNA/CABLE to CABLE and press OK. ANTENNA / CABLE For details, see page 31. CABLE SELECT NEXT CANCEL EASY SET UP 5 The AUTO PRESET starts. SET UP SET UP TUNER PRESET...
- Page 23 VCR. After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. The VCR sets the clock by picking up time signals provided by Sony Entertainment Television (SETV).
-
Page 24: Selecting A Language
Selecting a MENU language You can change the on-screen display language. >/. MENU Press MENU, then press >/. to highlight AJUSTES AJUSTES and press OK. PREAJUSTE DEL SINTONIZADOR AJUSTE DEL RELOJ SELECCION DEL IDIOMA NVOLVER When using the EASY SET UP procedure, skip steps 1 and 2. -
Page 25: Setting The Clock
Setting the clock Using the Auto Clock Set feature MENU Sony Entertainment Television (SETV) transmits time signals with its broadcasts. If the cable TV station in your area broadcasts SETV and transmits these time signals as is, your >/. VCR can pick up these time signals to automatically set the clock. - Page 26 Setting the clock (continued) Press >/. to highlight AUTO, then press AUTO CLOCK SET FULL AUTO PLAY CLOCK SET CH DAYLIGHT SAVING NRETURN SELECT QUIT MENU Press >/. to highlight FULL AUTO, then AUTO CLOCK SET press OK. FULL AUTO PLAY CLOCK SET CH DAYLIGHT SAVING...
- Page 27 If the clock is not activated Number buttons MENU >/. Follow steps 1 to 4 in “Using the Auto AUTO CLOCK SET Clock Set feature.” FULL AUTO CLOCK SET CH The AUTO CLOCK SET menu is DAYLIGHT SAVING NRETURN displayed. SELECT QUIT MENU...
- Page 28 Setting the clock (continued) Press >/. to highlight NO for FULL AUTO CLOCK SET AUTO and press OK. FULL AUTO PLAY CLOCK SET CH – – – DAYLIGHT SAVING AUTO NRETURN SELECT QUIT MENU Press >/. to highlight the item you want to set and press OK.
-
Page 29: Using Manual Clock Set
Using Manual Clock Set Before you start… • Turn on the VCR and the TV. • Set the TV to the VCR channel (channel 3 or 4). If your TV is MENU connected to the VCR using A/V connections, set the TV to video input. •... - Page 30 Setting the clock (continued) Press >/. to set the month. CLOCK SET PLAY 9 / 1 / 1999 WE 12: 00AM SELECT QUIT MENU Press / to highlight the day and press CLOCK SET >/. to set the day. PLAY 9 / 28 / 1999 TU 12: 00AM The day of the week is set automatically.
-
Page 31: Presetting Channels
Presetting channels This VCR is capable of receiving VHF MENU channels 2 to 13, UHF channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic presetting. Then, if >/. - Page 32 Presetting channels (continued) Press >/. to highlight ANTENNA/CABLE, then press OK. PLAY • To preset cable TV channels: TUNER PRESET ANTENNA / CABLE CABLE Press >/. to set ANTENNA/CABLE to PLAY AUTO PRESET CABLE, then press OK. MANUAL SET FINE TUNING NRETURN SELECT QUIT...
- Page 33 Tips • When receiving a VHF, UHF, or CATV channel, the display changes as follows each time you press DISPLAY. Channel number Remaining tape length, and time counter The bar indicator and pointer for searching a specific point No display •...
-
Page 34: Presetting/Disabling Channels Manually
Presetting channels (continued) Presetting/disabling channels manually Number buttons, ENTER CH +/– MENU >/. MENU Press MENU, then press >/. to highlight SETTINGS SETTINGS and press OK. TUNER PRESET CLOCK SET LANGUAGE NRETURN PLAY SELECT QUIT MENU Press >/. to highlight TUNER PRESET, TUNER PRESET then press OK. - Page 35 Channel to be preset • To preset a channel: 1 Press the number buttons to enter the TUNER PRESET channel number, then press ENTER. ANTENNA / CABLE CABLE 2 Press OK. AUTO PRESET MANUAL SET 3 Press >/. to set MANUAL SET to FINE TUNING ADD, then press OK.
-
Page 36: If The Picture Is Not Clear
Presetting channels (continued) If the picture is not clear Normally, the Auto Fine Tuning (AFT) function automatically tunes in channels clearly. If, however, the picture of a channel is not clear, you can also use the manual tuning function. Number buttons, ENTER MENU... - Page 37 Selected channel Press the number buttons to select the channel you want to fine-tune, then press TUNER PRESET ENTER. ANTENNA / CABLE CABLE AUTO PRESET MANUAL SET FINE TUNING NRETURN SELECT QUIT MENU Press >/. to highlight FINE TUNING, TUNER PRESET then press OK.
-
Page 38: Basic Operations
Basic Operations Playing a tape 6 EJECT TRINITRON TV SYNCHRO PLAY CLEAR DISPLAY P PAUSE REPLAY · PLAY ) # FF p STOP 0 3 REW Turn on your TV and set it to the video channel. Insert a tape. The VCR turns on and starts playing §... - Page 39 Press · PLAY. When the tape reaches the end, it will rewind automatically. PLAY Additional tasks Press Stop play p STOP Pause play P PAUSE P PAUSE or · PLAY Resume play after pause Fast-forward the tape ) # FF during stop Rewind the tape 0 3 REW during stop Eject the tape...
- Page 40 Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play) You can only use this function if your TV is made by Sony (Trinitron TV). How to connect to use this function Connect the VCR and TV with the audio/video cable (see “Audio/video (A/V) hookup”...
-
Page 41: Recording Tv Programs
Recording TV programs TV/VIDEO DISPLAY SP/EP Number buttons, ENTER r REC CH +/– INPUT SELECT p STOP Turn on your TV and set it to the video channel. To record from a cable box, turn it on. Insert a tape with its safety tab in place. continued Basic Operations... - Page 42 Recording TV programs (continued) INPUT Press INPUT SELECT until a channel number appears in the display SELECT window. VIDEO APC Press CH +/– to select the channel you want to record. • CH VIDEO APC Press SP/EP to select the tape speed, SP or EP. SP / EP EP (Extended Play) provides recording time three times as long as SP (Standard Play), however, SP produces better picture and audio...
- Page 43 To check the remaining tape length Press DISPLAY repeatedly until the display below appears. The white bar indicates the approximate length of tape remaining. Remaining tape length 0 : 22 : 22 Time counter To watch another TV program while recording Press TV/VIDEO to turn off the VIDEO indicator in the display window.
-
Page 44: Recording Tv Programs Using The Timer
Recording TV programs using the timer SP/EP You can preset up to eight programs at a TIMER time. Before you start… Number buttons • Check that the VCR clock is set to the correct time. • Turn on your TV and set it to the video channel. - Page 45 Press >/. to highlight the line that is to be set, then press OK. PLAY Set the date, start and stop times, channel TIMER SET / CHECK 9 / 28 TU number and tape speed: DATE START STOP 9 / 30 8 : 00 9 : 00 –...
- Page 46 Recording TV programs using the timer (continued) To stop recording To stop the VCR while recording, press p STOP. Daily/weekly recording In step 3 above, press . to select the recording pattern. Each time you press ., the indication changes as shown below. Press > to change the indication in reverse order.
- Page 47 Tips • To set the channel, you can also use the CH+/– or number buttons. • To show the TIMER SET/CHECK menu, you can also use the MENU button. Press MENU, then press >/. to highlight TIMER SET/CHECK and press OK. •...
-
Page 48: Additional Operations
Additional Operations Playing/searching at various speeds SLV-L49 MX, L52 PA/PC, L59 CL/CS/PR/ & SLOW VZ, X55 MX, L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ and X66HF MX · PLAY )# FF 0 3 REW )# FF 0 3 REW SLV-L89HF CL/CS/MX/VZ 0 REW ·... -
Page 49: Using The Shuttle Ring
To resume normal playback Press · PLAY. Using the shuttle ring (SLV-L89HF CL/CS/MX/VZ only) With the shuttle ring, you can operate a variety of playback options. There are two ways for using the shuttle ring, normal mode and jog mode. Shuttle ring To use the shuttle ring in normal mode During playback or pause, turn the shuttle ring clockwise or... - Page 50 Playing/searching at various speeds (continued) To use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to jog mode during any playback mode, playback pauses so you can see a still picture.
-
Page 51: Searching For A Selected Point On The Tape
Searching for a selected point on the tape DISPLAY You can easily find a selected point by moving the pointer on the TV screen. The VCR fast-forwards or rewinds to the point you indicate and starts playback automatically. Press DISPLAY repeatedly until the bar indication appears on the TV screen. - Page 52 Searching for a selected point on the tape (continued) To cancel searching Press · PLAY or p STOP. To turn off the bar indication Press DISPLAY again. Notes • The figure on the bar indication represents the total time length of the inserted tape as shown below.
-
Page 53: Skip-Searching Automatically
Skip-searching automatically You can spot check a whole tape quickly. At intervals, the VCR skips playback while searching forward or backward. ) # FF 0 3 REW Hold down ) # FF (or 0 3 REW) more than two seconds during stop. “SKIP” indicator SKIP appears on the TV screen. -
Page 54: Recording Tv Programs Using The Dial Timer
Recording TV programs using the dial timer The Dial Timer function allows you to make timer recordings of programs without turning on your TV. Set the recording timer to record up to eight programs that will be broadcast within the next 24 hours using the DIAL TIMER. - Page 55 Press DIAL TIMER. “STOP” and the recording stop time appear alternately in the display window. VIDEO APC < VIDEO APC Turn DIAL TIMER to set the recording stop time. The time changes in 15 minute intervals. VIDEO APC Press DIAL TIMER. The channel appears in the display window.
- Page 56 Recording TV programs using the dial timer (continued) To stop recording To stop the VCR while recording, press p STOP. To use the VCR after setting the timer To use the VCR before a timer recording begins, just press 1/u. The indicator disappears from the display window and the VCR switches on.
-
Page 57: Setting The Recording Duration Time
Setting the recording duration time After starting recording in the normal way, you can have the VCR stop recording automatically after a specified duration. r REC While recording, press r REC once. VIDEO APC indicator appears in the display window. Press r REC repeatedly to set the duration. -
Page 58: Checking/Changing/Canceling Timer Settings
Checking/ changing/ canceling timer settings CLEAR TIMER Before you start… • Turn on your TV and set it to the video channel. >/./?// Press 1/u to turn on the VCR. Press TIMER to display TIMER SET/CHECK. • If you want to change a setting, go on to the next step. •... - Page 59 Press >/. to highlight the setting you want TIMER SET / CHECK 9 / 28 TU to change or cancel. DATE START STOP 9 / 30 8 : 00 9 : 00 10 / 2 1 : 00 1 : 30 •...
-
Page 60: Recording Stereo And Bilingual Programs
Recording stereo and bilingual programs (SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/ VZ, L89HF CL/CS/MX/VZ and X66HF MX only) Recording stereo programs This VCR automatically receives and records stereo programs. When a stereo program is received, the STEREO indicator lights up. If there is noise in the stereo program, set AUTO STEREO in the ADVANCED OPTIONS menu to OFF. - Page 61 How sound is recorded on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Monaural sound Normal audio track Hi-fi audio track...
-
Page 62: Adjusting The Picture
Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. In this case, manually adjust the tracking. - Page 63 About the Reality Regenerator function (SLV-L52 PA/PC, L72HF PA/PC and L89HF CL/CS/MX/VZ only) The Reality Regenerator function automatically restores the picture to its original quality during § playback. To use the Reality Regenerator function, press REALITY REALITY REGENERATOR REGENERATOR. The REALITY REGENERATOR button lights up.
-
Page 64: Changing Menu Options
Changing menu options Press MENU, then select ADVANCED ADVANCED OPTIONS OPTIONS and press OK. AUTO ANT SELECT AUTO STEREO TUNER AUDIO MAIN TAPE SELECT AUTO AUTO TAPE SPEED SHARPNESS NRETURN SELECT QUIT MENU Press >/. to highlight the option to change, then press OK. Press >/. -
Page 65: Editing With Another Vcr
Editing with another VCR How to hook up to record on this VCR SLV-L49 MX, L52 PA/PC, L59 CL/CS/PR/VZ and X55 MX This VCR (Recorder) § LINE-2 IN Other VCR (Player) LINE OUT VMC-710HG audio/video cable (not supplied) : Signal flow SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ and X66HF MX This VCR (Recorder) -
Page 66: Operation (When Recording On This Vcr)
Editing with another VCR (continued) Notes • Make sure you connect the plugs to jacks of the same color. • If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select the input correctly to prevent a humming noise. •... -
Page 67: Additional Information
Additional Information General setup information Setting the RF unit When connecting the VCR to the TV RF UNIT using only the antenna cable, you must set the RF UNIT switch on the rear of the VCR so that the TV can receive the correct signal from the VCR. -
Page 68: Attaching The External Antenna Connector
General setup information (continued) Attaching the external 300-ohm twin antenna connector lead cable When using a 300-ohm twin lead cable for VHF/UHF antenna, use the EAC-32 Antenna EAC-32 antenna connector (not connector (not supplied) to connect the antenna to the supplied) VCR. -
Page 69: Troubleshooting
Do not use a commercially available liquid-type cleaning cassette other than Sony’s, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony dealer for more information. - Page 70 Troubleshooting (continued) Symptom Remedy A TV program does not appear • Make sure the TV is set to the channel for the VCR. If on the TV screen. you are using a monitor, set it to video input. • Select the correct source with the INPUT SELECT button.
-
Page 71: Specifications
Specifications Timer section System Format Clock VHS NTSC standard Quartz locked Timer indication Video recording system 12-hour cycle Rotary head helical scanning FM system Video heads Timer setting Double azimuth four heads 8 programs per month (max.) Video signal Power back-up Built-in self-charging capacitor NTSC color, EIA standards Back-up duration: up to 8 hours at a time... -
Page 72: Index To Parts And Controls
Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel SLV-L49 MX, L52 PA/PC, L59 CL/CS/PR/VZ, X55 MX 3 4 5 § !∞ !¢ !£ !™ !¡ !º 8 7 6 1 1/u POWER switch/indicator (45) 9 DIAL TIMER button (54) 2 Tape compartment !º... - Page 73 SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, X66HF MX 3 4 5 § !∞ !¢ !£ !™ !¡ !º 8 7 6 1 1/u POWER switch/indicator (45) 9 DIAL TIMER button (54) 2 Tape compartment !º EASY SET UP button (12, 15, 18, 21) 3 0 3 REW (rewind) button (39, 48) !¡...
- Page 74 Index to parts and controls (continued) Front panel SLV-L89HF CL/CS/MX/VZ § !¶ !§ !∞ !¢ !£ !™!¡ 1 1/u POWER switch/indicator (45) 0 P PAUSE button (39) 2 Tape compartment !¡ DIAL TIMER button (54) 3 0 REW (rewind) button (39, 48) !™...
- Page 75 Display window STEREO VIDEO APC SAP LP SP 1 Timer indicator (45) 5 VIDEO indicator (43, 67) 2 SAP (Second Audio Program) 6 APC (Adaptive Picture Control) indicator (60) (SLV-L69HF MX, indicator (62) L72HF PA/PC, L79HF CL/CS/VZ, 7 Child Lock indicator (46) L89HF CL/CS/MX/VZ and X66HF MX only) 8 Tracking indicator (62)
-
Page 76: Rear Panel
Index to parts and controls (continued) Rear panel SLV-L49 MX, L52 PA/PC, L59 CL/CS/PR/VZ, X55 MX SLV-L69HF MX, L72HF PA/PC, L79HF CL/CS/VZ, L89HF CL/CS/MX/VZ, X66HF MX 1 AC power cord (7) 4 VHF/UHF OUT connectors (11, 14, 17, 20) 2 LINE-1 IN AUDIO/VIDEO jacks 5 RF (Radio Frequency) UNIT switch (66) (SLV-L49 MX, L52 PA/PC, L59 CL/CS/PR/VZ and X55 MX only) - Page 77 Remote commander 1 TV / VIDEO switch (5) 2 6 EJECT button (39) 3 TV/VIDEO button (6, 43) 4 TRINITRON TV SYNCHRO PLAY button (40) 5 DISPLAY button (43, 51) 6 SP (Standard Play)/EP (Extended Play) button (42) 7 INPUT SELECT button (42, 43, 66) 8 r REC (record) button (42, 57, 66) 9 &...
- Page 78 Index to parts and controls (continued) !£ 1/u (power) switch (6, 45) !¢ CLEAR button (39, 59) !£ !∞ AUDIO MONITOR button (60) !¢ (SLV-L69HF MX, L72HF PA/PC, !∞ L79HF CL/CS/VZ, L89HF CL/CS/ !§ MX/VZ and X66HF MX only) !§ TIMER button (44, 58) !¶...
-
Page 79: Index
Index A, B H, I, J, K Adjusting Hi-fi audio track 61 Safety tab 43 picture 62 SAP (Second Audio tracking 62 Program) 60 Advanced option 64 Searching Language selecting 24 AFT (Auto Fine Tuning) at various speeds 48 Locking the VCR 46 Antenna hookup 11 for a selected point 51 LP mode 39... -
Page 80: Quick Reference To Using The Vcr
(usually 2, 2 Select the channel with 3, or 4). your cable box (if you have 4 Set the cable box to the one) or with your TV. channel you want to watch. Sony Corporation Printed in U.S.A.