Step 4 : Tuning Your Tv To The Vcr - Sony SLV-X9N ShowView Operating Instructions Manual

Step 4 : Tuning your TV to the VCR

If your TV has a Scart (EURO-AV) connector, see page 20.
If your TV does not have a Scart (EURO-AV) connector
Follow the steps below so that your TV will properly receive the video
signals from your VCR.
1
2
AUTO
SET UP
RF CHANNEL
3
4
AUTO
SET UP
RF CHANNEL
18
Tuning your TV to the VCR
? ? ? ? /1 1 1 1
RF CHANNEL
Press ?/1 (on/standby) to turn on the VCR.
Press RF CHANNEL on the VCR lightly.
The currently set RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
Press RF CHANNEL.
The TV system appears in the display window.
PROGRAM +/–