Samsung DMR78 Series Service Manual page 25

Part
Panel Control
(DMR78/77 series)
All manuals and user guides at all-guides.com
Photo
1. Open the door completely.
2. Remove the fan motor connector.
3. Now remove the frame front and the panel control
3. Disassembly and Reassembly
Description
Remove the twelve (12) screws holding the tub front,
fame front, and panel front in place.
Caution
Before removing the screws, place a cushioned mat
on the floor to prevent the handle and frame front
from being scratched. After removing them, make
sure to hold the tub front with your hand while you
are working as the tub may close and harm you.
Caution
Do not place the removed screws on the tub front.
They may fall into the sump assy.
assy. Place it on the floor and perform the following:
Remove the panel control from the frame front.
You can remove the panel control by holding and
pulling it.
And, you can remove and replace the door lock
switch in this step. (Remove both connectors of door
lock switch.)
3-11