Acon On-Call Express Voice User Manual page 21

will be displayed and voiced. Press the Left (◄) button to switch. Press the
Right (►) button to confirm your selection. When the Ketone indicator is
enabled, if the test result is higher than 300 mg/dL, the symbol of "Ketone?" will
appear on the display.
9. Hyper Indicator: The meter comes with the Hyper indicator feature disabled.
Wait for the meter to say "Hyperglycemia Indicator" to set it. The words "On"
or "Off" will be displayed and voiced. Press the Left (◄) button to turn the
Hyper indicator "On" or "Off". Press the Right (►) button to confirm your
selection. When the Hyper indicator is "Off", pressing the Right (►) button will
take you to the Hypo indicator set up. When the Hyper indicator is "On",
pressing the Right (►) button will go to the Hyper indicator level set up. At the
Hyper level set up, press the Left (◄) button to adjust the Hyper level. Press the
Right (►) button to go to the Hypo indicator set up.
Note: The meter allows the hyperglycemia level to be as low as 120 mg/dL or
higher. The hyperglycemia level should be above the hypoglycemia level.
Consult your doctor before determining what your hyper blood glucose level is.
10. Hypo Indicator: The meter comes with the Hypo indicator feature disabled.
Wait for the meter to say "Hypoglycemia Indicator" to set it. The words "On"
or "Off" will be displayed and voiced. Press the Left (◄) button to turn the Hypo
indicator "On" or "Off". Press the Right (►) button to confirm your selection.
When the Hypo indicator is "Off," pressing the Right (►) button will go to the
Test Reminder set up. When the Hypo indicator is "On", pressing the Right (►)
17