Table of Contents
Advertisement
PackshotStart 360
HARDWARE INSTALLATION
DISASSEMBLY 2/2:
07
Unplug all the light connections:
(turntable, 2 on the front light
columns, 4 on the rear light
columns.)
10
Unscrew the 4 large hand screws
holding the built in turntable
module.
08
Disconnect the 2 metal connectors
for the turntable.
11
Remove the 4 large hand screws
holding the corner light columns.
09
Tape the driving module down to
secure.
12
Once the hand screws and cables are
loosened the entire machine can thus
be dissembled to its individual parts.
Advertisement
Table of Contents
