Adjusting The Speaker Volume - Sony DVP-NS92V Operating Instructions Manual

LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
R (0 dB)
CENTRE
(0 dB)
SUBWOOFER
(DVD: –5 dB/
Super Audio
CD: 0 dB)
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
R (0 dB)
To adjust the volume of all the speakers at
one time
Use the amplifier's (receiver's) volume
control.
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust "LEVEL (FRONT)" and "LEVEL
(REAR)."
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence while
adjusting level.
82
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –6 dB and 0
dB in 0.5 dB increments.
Set this between –12 dB and
0 dB in 0.5 dB increments.
Set this between –15 dB and
+5 dB in 0.5 dB increments.
Set this between –12 dB and
0 dB in 0.5 dB increments.
Set this between –12 dB and
0 dB in 0.5 dB increments.

Adjusting the speaker volume

and level
1
Select "SPEAKER SETUP" in the Setup
Display.
2
Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"LEVEL (FRONT)" or "LEVEL (REAR)"
and adjust the value using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set to "OFF"
to turn off the test tone.
Note
The test tone signals are not output from the
DIGITAL OUT (COAXIAL or OPTICAL)/HDMI
OUT jack.